Motorola LS3408-FZ20005 User Manual - Page 132

10 - 2 Symbol LS3408 Product Reference Guide Connecting Using Scanner Emulation To perform Scanner Emulation, connect the scanner to a mobile computer, or a controller which collects the data and interprets it for the host. Host Port Connector Interface cable Figure 10-1 Scanner Emulation Connection NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 10-1 are examples only. The connectors may be different than those illustrated, but the steps to connect the scanner are the same. 1. Connect the modular connector of the Scanner Emulation interface cable to the cable interface port on the scanner. See Installing the Interface Cable on page 1-3. 2. Connect the other end of the Scanner Emulation interface cable to the scanner port on the mobile computer or controller. 3. Ensure all connections are secure. 4. Scan the Scanner Emulation Host on page 10-4 to enable the Scanner Emulation host interface. 5. To modify any parameter options, scan the appropriate bar codes in this chapter. WARNING! Connect the scanner to 5 volt decoders only. Connecting the scanner to a 12 volt decoder causes damage and invalidates the warranty.