Motorola LS3408-FZ20005 User Manual - Page 72

6 - 2 Symbol LS3408 Product Reference Guide Connecting an RS-232 Interface The scanner connects directly to the host computer. Serial Port Connector to Host Interface cable Power supply cable Figure 6-1 RS-232 Direct Connection NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 6-1 are examples only. The connectors may be different than those illustrated, but the steps to connect the scanner are the same. 1. Attach the modular connector of the RS-232 interface cable to the cable interface port on the scanner. See Installing the Interface Cable on page 1-3. 2. Connect the other end of the RS-232 interface cable to the serial port on the host. 3. Connect the power supply to the serial connector end of the RS-232 interface cable. Plug the power supply to an appropriate outlet. 4. Ensure that all connections are secure. 5. Select the RS-232 host type by scanning the appropriate bar code from the RS-232 Host Types section on page 6-6. 6. To modify any other parameter options, scan the appropriate bar codes in this chapter.