Netgear AC797 User Manual - Page 59
Select an APN to Use, Remove an APN Entry, To select an APN, Settings > Mobile Broadband > APN
View all Netgear AC797 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
AirCard 797 Mobile Hotspot Note: PDP roaming protocol is the IP protocol used while you are roaming (for example when you are traveling and the roaming network does not support IPv6). 10. Click the Save button. The entry is added to the table. Select an APN to Use You can select a specific APN to use with the mobile hotspot. To select an APN: 1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a web browser. 2. Enter http://mywebui.net/ or http://192.168.1.1. The mobile hotspot web page displays. 3. Enter the administrator login password. The default Admin Login is different for each AC797 device. See the label under the battery. The password is case-sensitive. The home page displays. 4. Select Settings > Mobile Broadband > APN. 5. Select the Active radio button next to the APN entry. The APN is selected. Remove an APN Entry You can remove an existing APN from the APN setup. To remove an APN: 1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a web browser. 2. Enter http://mywebui.net/or http://192.168.1.1. The mobile hotspot web page displays. 3. Enter the administrator login password. The default Admin Login is different for each AC797 device. See the label under the battery. The password is case-sensitive. The home page displays. Maintain Your Mobile Hotspot 59 User Manual