Netgear CBR40 User Manual - All MSOs - Page 97
Factory Settings, Factory Settings for Orbi Cable Modem Router
View all Netgear CBR40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Orbi WiFi System Factory Settings You can return the cable modem router and satellite to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the cable modem router or satellite for at least seven seconds. The cable modem router or satellite resets, and returns to the factory settings. Factory Settings for Orbi Cable Modem Router The following table shows the factory default settings for the cable modem router. Table 5. Factory default settings for the cable modem router Feature Default Setting Router login User login URL User name (case-sensitive) orbilogin.com admin Login password (case-sensitive) password Internet WAN MAC address connection WAN MTU size Use default hardware address 1500 Port speed AutoSensing Local network (LAN) LAN IP Subnet mask DHCP server 192.168.1.1 255.255.255.0 Enabled DHCP range 192.168.1.2 to 192.168.1.254 DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.168.1.254 DMZ Disabled Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8 for NA Time zone adjusted for daylight saving Disabled time SNMP Disabled Firewall Inbound (communications coming in from Disabled (except traffic on port 80, the the Internet) HTTP port) Outbound (communications going out to Enabled (all) the Internet) Source MAC filtering Disabled Supplemental Information 97