Netgear DM111PSP DM111PSP User Manual - Page 19
Using the Setup Wizard to Auto-Detect the Internet Connection, Quick Setup - login
View all Netgear DM111PSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ADSL2+ Modem Router DM111PSPv2 User Manual • Quick Setup. You are prompted to configure the Internet connection and LAN settings. See "Using Quick Setup to Configure the Modem Router" on page 1-6. Using the Setup Wizard to Auto-Detect the Internet Connection To use the Setup Wizard to assist with configuration or to view the Internet connection settings: 1. Select Setup Wizard from the main menu, and the following screen displays: Figure 1-3 2. To use the Setup Wizard, select Yes, and then click Next. The Setup Wizard detects your ISP configuration. Depending on the type of connection, you are prompted to enter your ISP settings, as shown in the following table. Table 1-1. Auto-Detected Internet Connection Types Connection Type ISP Information PPP over Ethernet (PPPoE) Enter the login user name and password. These fields are case- PPP over ATM (PPPoA) sensitive. Dynamic IP Account Setup No entries are needed. IP over ATM Classical IP assignment (RFC1577) • Enter the assigned IP address, subnet mask, and the IP address of your ISP's primary DNS server. If a secondary DNS server address is available, enter it also. • DNS servers are required to perform the function of translating an Internet name such as www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must obtain DNS server addresses from your ISP and enter them manually here. Configuring Your Internet Connection 1-5 v1.0, December 2008