Home » Netgear Manuals » Modems » Netgear DM111PSP » Manual Viewer

Netgear DM111PSP DM111PSP User Manual - Page 62

Table 5-3. Internet Connection Type Settings - bridge mode

Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

ADSL2+ Modem Router DM111PSPv2 User Manual 3. Click Next to continue. The Connection Type screen displays. Figure 5-3 4. Enter or select the Internet connection type settings that are explained in the following table. Your ISP will advise you which settings to use. Table 5-3. Internet Connection Type Settings Setting Protocol Encapsulation Type Enable QoS Enable 802.1Q VLAN Tagging Description • PPP over ATM (PPPoA) • PPP over Internet (PPPoE) • IP over ATM (IPoA) • Bridging • LLC/SNAP (the default setting) • VC MUX Quality of Service (QoS) support is enabled by default. This settings, which is available only in PPPoE and bridged mode, allows multiple computers to share the same physical network. 5-4 Advanced WAN Configuration v1.0, December 2008

Section	Page
ADSL2+ Modem Router DM111PSPv2 User Manual	1
Contents	7
About This Manual	11
How to Use This Book	11
Conventions, Formats, and Scope	12
How to Use This Manual	13
How to Print This Manual	13
Revision History	14
Chapter 1 Configuring Your Internet Connection	15
Installation Requirements	15
Using the Smart Wizard to Set Up Your Modem Router	16
Logging In to the Modem Router	16
Setting Up Your Modem Router Manually	18
Using the Setup Wizard to Auto-Detect the Internet Connection	19
Using Quick Setup to Configure the Modem Router	20
How the Internet Connection Works	22
Chapter 2 Managing Your Modem Router	23
Changing the Password	23
Backing Up, Restoring, or Erasing Your Settings	24
Backing Up the Configuration to a File	24
Restoring the Configuration from a File	25
Resetting the Configuration to the Factory Default Settings	25
Upgrading the Modem Router’s Firmware	25
Network Management Information	27
Viewing the Router Status	27
Viewing Attached Devices	29
Viewing the ADSL Line Status	30
Setting up the System Log	31
Diagnostic Utilities and Rebooting the Modem Router	33
Running Diagnostics Tests	33
Routing Table	34
Remote Access	35
Chapter 3 Security and Firewall Protection	37
Firewall Settings	37
Firewall Rules (IP Filtering)	38
Outbound Firewall Traffic Rules	40
Inbound Firewall Traffic Rules	41
Port Forwarding (Inbound Rules)	42
Port Triggering (Outbound Rules)	44
Configuring a DMZ Host	46
Enabling Universal Plug and Play (UPnP)	47
Chapter 4 Advanced Configuration	49
LAN IP Setup	49
Understanding the LAN IP Settings	51
Reserved IP Addresses	52
Static Routes	53
IGMP Proxy	55
Internet Time Settings	56
Enabling VoIP Connections	57
Chapter 5 Advanced WAN Configuration	59
WAN Setup	59
Selecting Your Domain Name Server (DNS)	65
Static DNS	66
Dynamic DNS	66
Quality of Service (QoS) Settings	68
TR 069 Client Configuration	70
Chapter 6 Troubleshooting	73
Basic Functioning	74
Power LED Is Off or Never Turns Green	74
ADSL LED Is Off or Is Blinking	75
Ethernet LED or Internet LEDs Not On	76
Cannot Log in to the Modem Router	76
Modem Router Does Not Save Configuration Changes	78
Troubleshooting the Internet Connection	78
Troubleshooting PPPoE or PPPoA Connection	79
Troubleshooting Internet Browsing	79
Restoring the Default Configuration and Password	80
Using the Reset Button	80
Problems with Date and Time	80
Appendix A Technical Specifications	81
Appendix B Related Documents	83