Netgear FSM726v2 FSM726v2 Setup Manual - Page 120
Config-tftp Path/File, IP, IP-Filter
View all Netgear FSM726v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
700 Series Software Manual v2.1 FSM726(config)# system config-tftp ip Where = the IP address of the TFTP server. Config-tftp Path/File The config-tftp path/file command lets you configure the path and the filename of the configuration file to be loaded/saved. Syntax FSM726(config)# system config-tftp path/file Where = the path and the filename of the file IP The IP command lets you set the IP address of the switch. Syntax FSM726(config)# system ip Where = the IP address of the switch. IP-Filter The purpose of IP filtering is to prevent unauthorized personnel from gaining access to the switch. This is accomplished by allowing only certain IP addresses to be able to access the management. This command enables IP filtering on the switch. The No command will disable it. Syntax FSM726(config)# system ip-filter 6-28 Command Line Interface