Netgear FSM726v2 FSM726v2 Setup Manual - Page 96
Show DiffServ, Show Dot1x, Show Interfaces, Reauthentication Timer value.
View all Netgear FSM726v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
700 Series Software Manual v2.1 Show DiffServ Use the show diffserv command to view the priority associated with each DSCP value. Syntax FSM726# show diffserv An example of the partial output is shown below. DSCP Priority 0 normal 1 normal 2 normal 3 normal 4 normal 5 normal 6 normal Show Dot1x Use the show dot1x command to show the authentication server IP, shared secret, and the Reauthentication Timer value. Each port is listed with the 802.1x state, which can be forced authorized, forced unauthorized (deny client to access network), or auto detected. The Reauthentication Timer value specifies the time interval between the authentication server's checks of users connected to the network. The default time interval is 3600 seconds. Show Interfaces The show interface command displays such information as port statistics, duplex, speed, and other port-related information. Syntax 6-4 Command Line Interface