Netgear FSM726v2 FSM726v2 Setup Manual - Page 97
Show IP, Show Mac-Address-Table, output: 223115 Bytes, 484 Unicast Packets
View all Netgear FSM726v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
700 Series Software Manual v2.1 FSM726# show interface Ethernet Where = x is the stack number (always 1 in FSM726), y is the port number An example of the display output is shown below. FastEthernet1/23 is Up Hardware is Fast Ethernet Auto-duplex (Full), Auto Speed (100), 100BaseTX/FX pvid is: 1 cos is normal broadcast rate limit is 1488100 packets/second input: 63994 Bytes, 489 Unicast Packets, 83 Non-unicast Packets 0 Packet Discards, 0 Packet Errors 0 Undersized Packets, 0 Oversized Packets output: 223115 Bytes, 484 Unicast Packets, 4 Non-unicast Packets 0 Packet Discards, 0 Packet Errors Show IP The show IP s IP information Syntax FSM726# show ip An example of the display output is shown below. IP Assignment Mode: Manual IP address: 169.254.224.1 Subnet mask: 255.255.0.0 Show Mac-Address-Table The show mac-address-table command displays a variety of information on the status and content of the MAC-address-table. Command Line Interface 6-5