Netgear FSM7328PS FSM7328PS Hardware manual - Page 10

Managed Stackable Layer 3 Fast Ethernet Switches Hardware Installation Guide FSM7328S Front Panel and LEDs The following figure shows the front panel of the FSM7328S. The front panel contains LEDs, RJ-45 jacks, SFP module bays, stacking ports, and a console port. LEDs Figure 2-1 RJ-45 jacks SFP module bays Stacking ports Console port The following table shows the LEDs on the front panel of the switch. Table 2-1. LED Descriptions for FSM7328S LED Description Master Power Fan 10/100M ports One LED per port Green: This switch is the master of the stack. Off: The switch is not the master of the stack. Solid green: Power is supplied, and the switch is operating normally. Blinking green: Runtime code load in progress. Solid yellow: Power-On Self-Test (POST) in progress. Blinking yellow: POST failure or CPU failure. Off: Power is disconnected. Solid red: Fan has failed. Off: Fan is present and operating normally. Link/ACT/SPD LED • Off: No 10/100 Mbps link is established on the port. • Solid green: A valid 100 Mbps link is established on the port. • Blinking green: The port is sending or receiving packets at 100 Mbps. • Solid yellow: A valid 10 Mbps link is established on the port. • Blinking yellow: The port is sending or receiving packets at 10 Mbps. 2-2 Introduction v1.0, May 2007