Netgear FSM7328PS FSM7328PS Hardware manual - Page 15
FSM7352S Rear Panel, Table 2-3. FSM7352S LED Description continued
UPC - 606449051810
View all Netgear FSM7328PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Managed Stackable Layer 3 Fast Ethernet Switches Hardware Installation Guide Table 2-3. FSM7352S LED Description (continued) Power Solid green: Power is supplied, and the switch is operating normally. Blinking green: Runtime code load in progress. Solid yellow: Power-On Self-Test (POST) in progress. Blinking yellow: POST failure or CPU failure. Off: Power is disconnected. 10/100M ports One LED per port Link/ACT/SPD LED • Off: No 10/100 Mbps link is established on the port. • Solid green: A valid 100 Mbps link is established on the port. • Blinking green: The port is sending or receiving packets at 100Mbps. • Solid yellow: A valid 10 Mbps link is established on the port. • Blinking yellow: The port is sending or receiving packets at 10 Mbps. 10/100/1000M ports Three LEDs per port Link/ACT LED • Off: No 10/100/1000 Mbps link is established on the port. • Solid green: A valid 1,000 Mbps link is established on the port. • Solid yellow: A valid 10/100 Mbps link is established on the port. • Blinking green: The port is sending or receiving packets at 1,000 Mbps. • Blinking yellow: The port is sending or receiving packets at 10/100 Mbps. Stack LED • Green: Stack port has a valid link connection. • Off: Stack port does not have a valid link connection. SFP Port (1,000 Mbps only) • Solid green: Link is up. • Blinking green: The port is sending or receiving packets in link up status. • Off: No link is detected. FSM7352S Rear Panel The rear panel has a console port and a standard AC power receptacle for the supplied power cord. Console port Power receptacle Figure 2-6 Introduction 2-7 v1.0, May 2007