Netgear GA622T GA622T Reference Manual - Page 13

Table 2-1. Software and Hardware Requirements (continued) System Requirements NetWare Hardware A Pentium-based server that meets NetWare 4.2, NetWare 5.0, or NetWare 5.1 software requirements One open 32-bit or 64-bit PCI slot Minimum 64 MB memory Operating System If you are using NetWare 4.2, you must have the most recent support pack (Support Pack 8 or later).To download the latest support pack, go to the following Novell Web page: http://support.novell.com/products/nw42/patches.htm For NetWare 5.0, download the most recent support pack (Support Pack 4 or later).To download the latest support pack, go to the following Novell Web page: http://support.novell.com/products/nw5/patches.htm Software GA622T Copper Gigabit Ethernet Card driver software, version 1.0 (or higher) (loaded during for NetWare, which is Included on the GA622T Copper Gigabit Ethernet Card driver installation) Driver and Documentation CD in the \Netware directory.The necessary files are: • Ga622.lan (network device driver file) • Ga622.ldi (information used by installation program) Red Hat Linux Hardware A Pentium-based server that meets Red Hat Linux 6.1 or 6.2 software requirements One open 32-bit or 64-bit PCI slot Operating System Red Hat Linux 6.1 or 6.2 Software GA622T Copper Gigabit Ethernet Card driver software, version 1.0 (or higher) (loaded during for NetWare, which is included on the GA622T Copper Gigabit Ethernet Card driver installation) Driver and Documentation CD in the \Linux directory.The necessary files are: • ga.c (Linux network OS specific module file) • ga622t.h (Driver header file) • gam.o (Driver object module for 2.2.17 kernel) • hsm.c (Hardware specific module file) • hsm.h (Hardware specific module header file) • nsm.h (HSM related data structures) • nsmtypes.h (Definition type define) • sp.c (Tunable parameters) • Makefile Rules to compile and install the driver) hardware installation 2-4