Netgear GA622T GA622T Reference Manual - Page 24
Moving the Network Card to a Different Slot
UPC - 606449021561
View all Netgear GA622T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Table 3-1. Parameter Descriptions (continued) Property Description Pause Frames Count IEEE 802.3x flow control settings help fine-tune network performance by preventing dropped packets. Pause Frames High Threshold IEEE 802.3x flow control settings help fine-tune network performance by preventing dropped packets. Pause Frames Low Threshold IEEE 802.3x flow control settings help fine-tune network performance by preventing dropped packets. Receive Buffer Count Specifies hardware resources in memory used to receive packets. Transmit Buffer Count Specifies hardware resources in memory used to send packets. Increasing this value may increase transmit performance. Moving the Network Card to a Different Slot Windows 98 automatically detects the installation and removal of hardware.To move a GA622T Copper Gigabit Ethernet Card to a different slot in the same system: 1. Shut down the system and remove the card from the PCI slot. 2. Install the card in its new PCI slot (see "Installing Your Copper Gigabit Ethernet Card" on page 2-7). 3. When the system is powered on, reinstall the driver software (see "Installing the Driver Software" on page 3-1). Windows 95OSR2/98/Me driver software 3-7