Netgear WNDAP350 WNDAP350 User Manual - Page 61
Configuring WPA2-PSK, Network Authentication, WPA-PSK, Encryption, Wireless Client Security Separation
UPC - 606449064643
View all Netgear WNDAP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual To configure WPA-PSK: 1. From the Network Authentication drop-down menu, select WPA-PSK. By default, Data Encryption will be set to TKIP. 2. Enter the preshared key passphrase (Network Key). 3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations. 4. Click Apply to save your settings. Configuring WPA2-PSK Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. Figure 2-22 Configure WPA2-PSK To configure WPA2-PSK: Basic Installation and Configuration v1.1, November 2009 2-41