Netgear XM128 XM128 Installation Guide - Page 29
is used to enter the SPID and switch values, To enter the SPID and switch values directly
View all Netgear XM128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Getting Started Using FirstGear for the Model XM128U ISDN Digital Modem If the Wizard is unable to determine the SPID and/or switch values, you will be prompted to enter these values directly. Refer to the information supplied by your local telephone company. The ISDN Settings menu tab, as illustrated in Figure 3-11, is used to enter the SPID and switch values directly. Figure 3-11. ISDN Settings menu tab screen To enter the SPID and switch values directly: 1. Enter each of the values into the corresponding fields. The telephone numbers have already been entered based on values entered earlier. 2. Enter the corresponding SPID numbers and select the switch type from the pull-down menu. 3. Click on OK to continue. Based on these new values, the Wizard attempts a test call. If the call fails, you will be prompted once again to recheck the values. If the problem persists, contact NETGEAR customer support. Installation 3-13