Nikon F50D Instruction Manual - Page 24
Using Built-In Flash, Auto Rewind
UPC - 074101484687
View all Nikon F50D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Using Built- In Flash Use the built-in flash not only when the ready-light blinks, but also when your subject is in shadow or backlit. See pages 51 to 55 . Auto Rewind When the film reaches the end of the roll, auto rewind begins. During rewinding, ta and ~ blink in the LCD panel. After rewind automatically stops, frame counter shows E and ta blinks for a few seconds. You can then remove film cartridge. • When battery power is very weak, or when the temperature is very low, film may not rewind at the end of roll and Err appears in the LCD panel. In this case, replace battery with a fresh one, or wait for the temperature to rise and then press the rewind button. To rewind film at mid-roll: Press the rewind button on the camera bottom. 24
24
Using Built-In Flash
Use the built-in flash not only
when the ready-light blinks, but
also when your subject is
in
shadow or backlit.
See pages
51
to 55 .
Auto Rewind
When the film reaches the end
of
the roll, auto rewind begins.
During rewinding,
ta
and
~
blink in the LCD panel. After rewind
automatically stops, frame counter shows E and
ta
blinks for a
few seconds. You can then remove film cartridge.
• When battery power is very weak, or when the temperature is
very low, film may not rewind at the end
of
roll and
Err
appears
in
the LCD panel.
In
this case, replace battery with a fresh one,
or wait for the temperature to rise and then press the rewind
button.
To rewind film at mid-roll:
Press the rewind button on the
camera bottom.