Nikon F50D Instruction Manual - Page 9
Installing, Battery
UPC - 074101484687
View all Nikon F50D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INSTALLING BATTERY ... 1 Make sure the camera's power is off, then slide the lock release on the battery chamber cover to open the chamber. 2 Insert a 6V lithium pack with "+" and "-" ends positioned as shown on the inside of the cover. Close the cover by pushing until it clicks . - Use 6V lithium battery pack (2CR5 or DL245 type). -See page 62 for "NOTES ON BATTERIES". J 3 Switch the power ON. Check the LCD panel to see if the frame counter shows "E" or the frame number appears and no battery mark (~ or = ) appears. If ~ blinks: Battery is nearing exhaustion. Have a fresh one ready. If Err and = blink: Battery is almost ex hausted . Switch power OFF and replace battery with fresh one. If no indication appears on the LCD panel: Battery is completely exhausted or improperly instal led. Change the battery. 9