Oki B6100n Guide: Installation (B6100) - Page 63
Error Messages, The table below lists error messages, the possible causes of each error
View all Oki B6100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Oki B6100 Installation Guide 5 Warning Messages and Error Messages Error Messages The table below lists error messages, the possible causes of each error, and the actions required to recover from each error. Error Message Line 1 Error Message Line 2 Possible Cause E2 JAM MISFEED E3 JAM FUSER E4 EXIT JAM E6 JAM OFF. TRAY E7 JAM DUPLEX Remove Paper There is a paper jam inside the printer. E5 COVER OPEN Close Top Cover The top cover is open. E5 COVER OPEN Close Rear Cover The rear cover is open. J3 TONER CART. Install/Reset The print cartridge is not installed, or an incorrect cartridge is installed. TRAY 1 MISSING Insert Tray Tray 1 is not in the printer. TRAY 2 MISSING Insert Tray Tray 2 is not in the optional feeder. TRAY 3 MISSING Insert Tray Tray 3 is not in the optional feeder. LOAD PAPER TRAY1 Paper Size/Paper Tray 1 is empty. Type LOAD PAPER TRAY2 Paper Size/Paper Tray 2 is empty. Type LOAD PAPER TRAY3 Paper Size/Paper Tray 3 is empty. Type LOAD PAPER FRONT Paper Size/Paper The front tray is empty. Type PAPER SIZE ERROR Paper Size/Press The paper size is not Start supported by the printer. OUTPUT TRAY FULL Remove Paper OFFSET TRAY FULL Remove Paper The output tray is full. The offset output tray is full. Action Remove the jammed paper from the indicated location. See the online User Guide (on the CD-ROM) for information about removing paper jams. Close the top or rear cover. Close the offset tray cover. Install the correct print cartridge according to the specifications. Insert the tray. Insert the tray. Insert the tray. Load paper into the tray. Load paper into the tray. Load paper into the tray. Load paper into the tray. Check paper size specifications and load paper that meets specifications. Remove paper from the tray. Remove paper from the tray. Oct 02