Oki PM4410 Users' Guide OkiLAN 6100e+ - Page 117

Section 4 - Chapter 4 - OkiNet for TCP/IP far left of the screen, follow these steps: 1. Select the first column in the Columns Displayed field. 2. Select the column to be added from the Columns Available field. 3. Select Add. Columns may also be removed by selecting Remove from the Columns Available field. Refresh The refresh rate defines how often the OkiNet for TCP/ IP utility updates the main print server list. To define a refresh rate, select Automatic Refresh and enter the refresh rate in the field provided. Decide how frequently to refresh the screen based on factors such as network traffic and desire for most recent information. For example, if traffic on your network is not an issue and the most current information is desired, set the refresh rate to 1 so that the screen is updated every minute. If network traffic is an issue, you may wish to set the refresh rate to 10. This would update the screen every ten minutes and minimize network traffic. Permanently Defining SNMP Access Information Access to OkiLAN 6100e+ configuration and diagnostic information is determined by using community names. The Special Options window is used to permanently define access information so that it does not need to be entered each time the OkiLAN 6100e+ is accessed. To Get and/or Set information on the OkiLAN 6100e+ through OkiNet for TCP/IP, community names must match the community names assigned to the OkiLAN TCP/IP OKI OkiLAN 6100e+ User's Guide IV - 39