Oki PM4410 Users' Guide OkiLAN 6100e+ - Page 177
Printing a Configuration Sheet, Enabling/Disabling Protocols
View all Oki PM4410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Section 5 - Chapter 3 - The OkiNet for VINES Utility Restore VINES Defaults Clears the Print Service names assigned and user name/ password. This does not affect the configurations of other protocols. Restore Output Port Default Clears the output port configurations. This will affect the print jobs of other protocols. Restore VINES and Output Port Defaults. This option does both Restore VINES Defaults and Restore Output Port Defaults. This will affect the print jobs of other protocols. The OkiLAN 6100e+ in default configuration will be identified as "OKI#######" where ####### is the serial number of the OkiLAN 6100e+. CAUTION: Make sure that no print jobs are active when you make these selections. If you reset the OkiLAN 6100e+ while a job is printing, the job will not print successfully. Printing a Configuration Sheet You can print a configuration sheet at any time by using the Print pull-down menu on the Print Server Configuration screen. Select Configuration Sheet. A configuration sheet will also print if the OkiLAN 6100e+ fails due to a network protocol error. Enabling/Disabling Protocols To enable or disable individual protocols, use the Protocols option from the Print Server Configuration screen. Select Enable/Disable. You should disable protocols which are not in use. Disabling a protocol will keep the OkiLAN 6100e+ from generating any network traffic from that protocol. Banyan VINES OKI OkiLAN 6100e+ User's Guide V - 19