Oki PM4410 Users' Guide OkiLAN 6100e+ - Page 211
Unable to Print from a Macintosh, Unable to Print a Document
View all Oki PM4410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
EtherTalk Section 7 - Appendix A - Troubleshooting • Verify that the OkiLAN 6100e+ has passed self-test. The status indicator should be solid green. • Check the connections between the OkiLAN 6100e+ and the Macintosh. When the OkiLAN 6100e+ does not appear in the Chooser, it is often caused by a cabling problem. • Verify EtherTalk Phase 2 is selected in the Control Panel. Unable to Print from a Macintosh If you are unable to print from a Macintosh via the OkiLAN 6100e+, try the following: • Verify the OkiLAN 6100e+ appears in the Chooser as a LaserWriter device. If the OkiLAN 6100e+ does appear in the Chooser, make certain it is selected. • Make sure you are using System and Finder version 6.02 or later and LaserWriter driver version 8.0 or later. • Verify the printer supports PostScript Level 2 via the printer test/ configuration sheet. • If the status message Printer Error: Bi-Di communication on printer's parallel port is not enabled appears, verify your printer's parallel port is a bidirectional port and is enabled. • Print an OkiLAN 6100e+ configuration sheet to verify language switch settings. Verify the setting is NOT PCL. • Verify the printer's language setting is NOT PCL. Unable to Print a Document If a document will not print, first check your printer. Look for paper jams, an empty paper tray, low toner error or other error conditions. Try to print the document again. If it still does not print, exit the application and try a Desktop Print from the File menu. If the directory prints correctly, re-enter the application and try to print a different document. If the second document prints successfully, your problem may be OKI OkiLAN 6100e+ User's Guide VII - 9