Oki PM4410 Users' Guide OkiLAN 6100e+ - Page 50

Section 3 - Chapter 1 - Introduction Chapter 1: Introduction Overview This section contains instructions and information on how to configure your OkiLAN 6100e+ in the NetWare environment. There are two environments in which to configure the OkiLAN 6100e+: • Bindery (NetWare 3.x) • NetWare Directory Services (NDS)-for NetWare versions 4.1 and later. Before You Start • You should be familiar with network administration as well as the physical setup and operation of your network. • Write down the serial number and the Ethernet or Token-Ring address of your OkiLAN 6100e+. You will find these numbers on the OkiLAN 6100e+ enclosure. • Install the OkiLAN 6100e+ hardware and connect the cabling-see Section I. Instructions for hardware installation are found in Section I of this manual. • Install the OkiNet Utility for NetWare-see Section I. III - 4 OKI OkiLAN 6100e+ User's Guide