Olympus C-60 Zoom C-60 Zoom Reference Manual - Page 153

No picture is displayed on the TV when connected to the camera.

Page 153 highlights

Troubleshooting Possible cause Corrective action Ref. Page Pictures you have taken do not appear on the monitor. The power is off. Press the (playback) button. P. 21, 89 The camera is in the shooting mode. Close the lens barrier and press the (playback) button. P. 89 There are no pictures on NO PICTURE appears on the - the card. monitor. Record pictures. There is a problem with the card. Refer to "Error codes". P. 143 The camera is connected to a TV. The monitor does not function when the AV cable is connected to the camera. P. 97 Single-frame erase and all-frame erase cannot be performed. The pictures are protected. Display pictures with and press the (protect) button to cancel protection. P. 100 No picture is displayed on the TV when connected to the camera. The video output signal is incorrect. Set the video output signal according to the region where used. P. 122 The TV video signal setting is incorrect. Set the TV to the video input mode. P. 97 The monitor is hard to see. The brightness is not adjusted properly. Select in the MODE MENU and adjust the brightness. P. 117 The monitor is exposed to Block the sunlight with your - direct sunlight. hand. 10 Miscellaneous 152

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205

No picture is displayed on the TV when connected to the camera.
The monitor is hard to see.
Single-frame erase and all-frame erase cannot be performed.
152
10
Miscellaneous
Pictures you have taken do not appear on the monitor.
Troubleshooting
The power is off.
The camera is in the
shooting mode.
There are no pictures on
the card.
There is a problem with
the card.
The camera is connected
to a TV.
The pictures are protected.
The video output signal is
incorrect.
The TV video signal
setting is incorrect.
The brightness is not
adjusted properly.
The monitor is exposed to
direct sunlight.
Press the
(playback) button.
Close the lens barrier and press
the
(playback) button.
NO PICTURE appears on the
monitor. Record pictures.
Refer to “Error codes”.
The monitor does not function
when the AV cable is connected
to the camera.
Display pictures with
and
press the
(protect) button to
cancel protection.
Set the video output signal
according to the region where
used.
Set the TV to the video input
mode.
Select
in the MODE MENU
and adjust the brightness.
Block the sunlight with your
hand.
P. 21, 89
P. 89
P. 143
P. 97
P. 100
P. 122
P. 97
P. 117
Possible cause
Corrective action
Ref. Page