Onkyo HT-S7200 Owner Manual - Page 115
Wall Mounting, Using the Cork Stoppers for a More Stable Platform, Using the Floor Pads for Subwoofer
View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Connecting the Speakers-Continued Wall Mounting The speakers (center, surround, and surround back) can easily be wall mounted by using the keyhole slots. To mount the surround or surround back speakers vertically, use the keyhole slot shown to hang each speaker on a screw that's securely screwed into the wall. Surround speakers/Surround back speakers (SKR-770/SKB-770) Keyhole slot for wall mounting Using the Cork Stoppers for a More Stable Platform We recommend using the provided cork stoppers to achieve the best possible sound from your speakers. The cork stoppers prevent the speakers from moving, providing a more stable platform. Use stoppers for the center speaker. Cork stoppers To mount the center speaker horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall. Center speaker (SKC-770) Keyhole slots for wall mounting Bottom of the SKC-770 Using the Floor Pads for Subwoofer If the subwoofer is placed on a hard floor (wood, vinyl, tile, etc.) and playback is very loud, the subwoofer's feet may damage the flooring. To prevent this, place the supplied pads underneath the subwoofer's feet. The pads also provide a stable base for the subwoofer. 7-7/8" (200 mm) Pad Caution: A mounting screw's ability to support a speaker depends on how well it's anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. Use screws with a head diameter of 5/16" (8 mm) or less and a shank diameter of 5/32" (4 mm) or less. With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes. Leave a gap of between 7/32" (5 mm) and 3/8" (10 mm) Wall between the wall and the base of the screw head, as shown. (We recommend that you consult a home installation professional.) 7/32" to 3/8" (5 to 10mm) En-11