Onkyo HT-S7200 Owner Manual - Page 77
Miscellaneous (Volume/OSD) Setup, Volume Setup, OSD Setup
View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Advanced Setup-Continued Miscellaneous (Volume/OSD) Setup This section explains the items on the "Miscellaneous" menu. 1 Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [R]/[X] buttons to select "6. Miscellaneous", and then press [ENTER]. The "Miscellaneous" menu appears. 6. Miscellaneous 1. Volume Setup 2. OSD Setup 3 Use the Up and Down [R]/[X] buttons to select an item, and then press [ENTER]. The screen for that item appears. 4 Use the Up and Down [R]/[X] buttons to select an item, and use the Left and Right [F]/[S] buttons to change it. The items are explained below. 5 When you've finished, press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Volume Setup ■ Maximum Volume With this setting, you can limit the maximum volume. The Maximum Volume range is "Off", 79 to 30. ■ Power On Volume With this preference, you can specify the volume setting to be used each time the AV receiver is turned on. The range is "Last", "Min", 1 to 79 or "Max". To use the same volume level that was used when the AV receiver was turned off, select "Last". The "Power On Volume" cannot be set higher than the "Maximum Volume" setting. ■ Headphone Level With this preference, you can specify the headphone volume relative to the main volume. This is useful if there's a volume difference between your speakers and your headphones. The headphones level can be set from -12 dB to +12 dB. OSD Setup ■ Immediate Display This preference determines whether operation details are displayed onscreen when an AV receiver function is adjusted. On: Displayed (default). Off: Not displayed. Even when "On" is selected, operation details may not be output if the input source is connected to an HDMI IN. ■ Display Position This preference determines where on the screen operation details are displayed. Bottom: Bottom of the screen (default). Top: Top of the screen. ■ Language This setting determines the language used for the onscreen setup menus. You can select: English, Deutsch, French, or Spanish. 77