Onkyo HT-S7200 Owner Manual - Page 37
Turning On the AV Receiver, Turning On and Standby
View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Turning On the AV Receiver ON/STANDBY STANDBY indicator ON/STANDBY RECEIVER Turning On and Standby AV receiver Remote controller or Press the [ON/STANDBY] button. Alternatively, press the remote controller's [RECEIVER] button, followed by the [ON/STANDBY] button. The AV receiver comes on, the display lights up, and the STANDBY indicator goes off. To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote controller's [ON/STANDBY] button. The AV receiver will enter Standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the volume before you turn it off. Smooth Operation in a Few Easy Steps To ensure smooth operation, here's a few easy steps to help you configure the AV receiver before you use it for the very first time. These settings only need to be made once. ■ Do the 2EQ Room Correction and Speaker Setup-this is essential! See "Audyssey 2EQ™ Room Correction and Speaker Setup" on page 45. ■ Have you connected a component to an HDMI input, HDMI component video input, or digital audio input? If you have, see "HDMI Input Setup" on page 39, "Component Video Setup" on page 40, or "Digital Input Setup" on page 41 respectively. ■ Have you connected an Onkyo RI Dock? If you have, see "Changing the Input Display" on page 44. OUT IN TV/TAPE RI Dock 37