Onkyo HT-S7200 Owner Manual - Page 26
Connecting a TV or Projector, Step 1: Video Connection
![]() |
View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connecting the AV Receiver-Continued Connecting a TV or Projector See "Connecting Components with HDMI" on page 22 for HDMI connection information. Step 1: Video Connection Choose a video connection that matches your TV ( A or B ), and then make the connection. Step 2: Audio Connection Choose an audio connection that matches your TV ( a , b , or c ), and then make the connection. The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V, or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings. • With connection a , you can listen to and record audio from your TV and listen in Zone 2. • To enjoy Dolby Digital and DTS, use connection b or c . (To record or listen in Zone 2 as well, use a and b , or a and c .) Connection A B a b c AV receiver COMPONENT VIDEO OUT MONITOR OUT V TV/TAPE IN L/R DIGITAL IN COAXIAL 2 (CBL/SAT) DIGITAL IN OPTICAL 1 (GAME) Signal flow TV Component video input Composite video input Analog audio L/R output Digital coaxial output Digital optical output c B b a A OPTICAL OUT COAXIAL OUT Y PB PR COMPONENT VIDEO IN L R AUDIO OUT VIDEO IN Connect one or the other Connection b , c must be assigned (see page 41) TV, projector, etc. Hint! If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 28 and 30). 26
![](/manual_guide/products/onkyo-hts7200-owner-manual-431340c/26.png)