Onkyo HT-S7200 Owner Manual - Page 87
If the brand name is not found, Use the Right, button to select, Not Listed, and then press, ENTER].
View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Controlling Other Components-Continued 6 Use the arrow [R]/[X]/[F]/[S] 8 buttons to select a character, and If you can control component, use the Up and Down [R]/[X] then press [ENTER]. buttons to select "Works", and Repeat this step from the 1st character then press [ENTER]. to the 3rd character of the brand name. The "Remote Mode Setup" menu When you have entered the 3rd charac- appears. ter, select "Search" and press [ENTER]. After searching, a list of the brand name appears. If you cannot control component, use the Up and Down [R]/[X] buttons to select "Doesn't work (try next code)" and press 8-1. Remote Mode Setup -TV- Category TV Brand xxx [ENTER]. The next code is appear. Sharp : : 9 When you've finished, press the [SETUP] button. : Sony The setup menu closes. Not Listed If the brand name is not found: Use the Right [S] button to select "Not Listed", and then press [ENTER]. The brand name input panel appears. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 7 Use the Up and Down [R]/[X] buttons to select brand, and then press [ENTER]. After searching, a remote control code and the input procedure appear. Try it. 8-1. Remote Mode Setup Code -TV- xxxxx 1. While holding down Remote Mode [ TV ], press and hold down [DISPLAY] (3 seconds). 2. Enter the 5-Digit remote control code. 3. Push [MUTING] to see if the TV responds. 4. Push Remote Mode [RECEIVER]. 5. Choose "Works" or "Doesn't work". Works Doesn't work (try next code) 87