Onkyo HT-S7200 Owner Manual - Page 43
FM/AM Frequency Step Setup, Use the Left and Right
View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
First Time Setup-Continued FM/AM Frequency Step Setup For FM/AM tuning to work properly, you must specify the FM/AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 5 Press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 2 Use the Up and Down [R]/[X] but- tons to select "7. Hardware Setup", and then press [ENTER]. The "Hardware Setup" menu appears. 7. Hardware Setup 1. Remote ID 2. Tuner 3. HDMI 3 Use the Up and Down [R]/[X] but- tons to select "2. Tuner", and then press [ENTER]. The "Tuner" menu appears. 7-2. Tuner FM/AM Frequency Step 200kHz/10kHz 4 Use the Left and Right [F]/[S] buttons to select: 200kHz/10kHz: Select if 200 kHz/10 kHz steps are used in your area. 50kHz/9kHz: Select if 50 kHz/9 kHz steps are used in your area. 43