Onkyo HT-S7200 Owner Manual - Page 47
Use the Up and Down, Press [ENTER]. - review
![]() |
View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
First Time Setup-Continued • Make the room as quiet as possible. 6 Background noise can disrupt the room measurements. Close windows, silence cell phones, televisions, radios, air conditioners, 7 fluorescent lights, home appliances, light dimmers, or other devices. • Cell phones should be turned off or placed away from all audio electronics during the measurement process as Radio Frequency Interference (RFI) may cause measurement disruptions (even if the cell phone is not in use). 4 Press [ENTER]. The room correction and speaker setup starts. 8 2EQ: Auto Setup Do not unplug setup mic. Please keep quiet. Now measuring. . . Test tones are played through each speaker as Audyssey 2EQ™ Room Correction and Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements and do not stand between speakers and the microphone. 5 The following screen appears. 2EQ: Auto Setup Please place setup microphone at 2nd of listening area at ear height. Next Place the setup microphone at the next position (page 45), and then press [ENTER]. 9 Audyssey 2EQ performs more measurements. This takes a few minutes. 2EQ: Auto Setup Do not unplug setup mic. Please keep quiet. Now measuring. . . When prompted, place the setup microphone at the next position, and repeat step 5. When the measurements are complete, the following screen appears. 2EQ: Auto Setup Calculating... When the calculations are complete, the following screen appears. 2EQ: Auto Setup Review Speaker Configuration Subwoofer Front Center Surround Front High Surr Back Surr Back Ch Save Cancel : No : Full Band : 80Hz : 100Hz : 150Hz : 150Hz : 2ch Use the Up and Down [R]/[X] buttons to select an option, and then press [ENTER]. The options are: Save: Save the calculated settings and exit the room correction and speaker setup. Cancel: Cancel the room correction and speaker setup. Note: You can view the calculated settings for the speaker configuration, speaker distances, and speaker levels by using the Left and Right [F]/[S] buttons. If you selected "Save", the results are saved, and the following screen appears. 2EQ: Auto Setup Saving... 47
![](/manual_guide/products/onkyo-hts7200-owner-manual-431340c/47.png)