Onkyo HT-S7200 Owner Manual - Page 83
Setting the Powered Zone 2, Notes, Not Act
![]() |
View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Zone 2-Continued Setting the Powered Zone 2 4 If you've connected your Zone 2 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers Directly to the AV receiver" on page 82, you must set the "Powered Zone 2" setting to "Act" (Acti- vated). 1 Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 5 Use the Up and Down [R]/[X] buttons to select "Powered Zone 2", and use the Left and Right [F]/[S] buttons to select: Not Act: ZONE 2 L/R speaker terminals not activated (Powered Zone 2 disabled). Act: ZONE 2 L/R speaker terminals activated (Powered Zone 2 enabled). Press the [SETUP] button. The setup menu closes. 2 Use the Up and Down [R]/[X] buttons to select "2. Speaker Setup", and then press [ENTER]. The "Speaker Setup" menu appears. Notes: • When "Act" is selected and Zone 2 turned on, the 2. Speaker Setup 1. Speaker Settings 2. Speaker Configuration 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings Zone 2 speakers connected to the ZONE 2 L/R speaker terminals output sound, but the surround back or front high speakers connected to the SURR BACK/ FRONT HIGH L/R speaker terminals do not. When "Act" is selected and Zone 2 turned off, the surround back or front high speakers output sound as normal. • When the "Powered Zone 2" setting is set to "Act" and the input selector of Zone 2 is selected, power 3 Use the Up and Down [R]/[X] buttons to select "1. Speaker consumption on standby mode slightly increases. • Powered Zone 2 cannot be used if "Speaker Type" is Settings", and then press set to "Bi-Amp" (see page 42). [ENTER]. • This procedure can also be performed on the AV The "Speaker Settings" menu appears. receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 83
![](/manual_guide/products/onkyo-hts7200-owner-manual-431340c/83.png)