Onkyo TX-NR747 User Manual - Page 70
En-38, Setting Item, Default Value, Setting Details
View all Onkyo TX-NR747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Setting Item Powered Zone 2 Speaker Impedance Default Value No 6ohms Setting Details Set the connection of speakers to Zone 2 speaker terminals. "Yes": When speakers are connected to ZONE2 speaker terminals "No": When speakers are not connected to ZONE2 speaker terminals ●● This item will be set to "No" when "Bi-Amp" is set to "Yes". Set the impedance of the connected speakers. "4ohms": When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance "6ohms": When the connected speakers all have 6 Ω or more impedance ●● For impedance, check the indications on the back of the speakers or their instruction manual. Setting Item Center Height Crossover Allows you to change speaker configurations, such as crossover frequency. Settings are automatically configured if you use the Automatic Speaker Setup. Audio will not be output while you are making this setting. ●● If you are using THX-certified speakers, we recommend the following settings: - Set a value "80Hz(THX)" in Crossover frequency. - Set a value "80Hz(THX)" in LPF of LFE. - Set a value "Off(THX)" in Double Bass. Setting Item Front Default Value 80 Hz(THX) Setting Details Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● If "Configuration" - "Subwoofer" is set to "No", "Front" will be fixed to "Full Band" and the low pitched range of the other channels will be output from the front speakers. Refer to the instruction manual of your speakers to make the setting. Surround Advanced Settings (Setup Menu) Default Value 80 Hz(THX) 80 Hz(THX) 80 Hz(THX) Setting Details Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● "Full Band" can be selected only when "Front" is set to "Full Band". ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● "Full Band" can be selected only when "Front" is set to "Full Band". ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● "Full Band" can be selected only when "Front" is set to "Full Band". ●● If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. En-38