Onkyo TX-NR747 User Manual - Page 86
Consulting the Remote Control Code List, Remapping the Colored Buttons
View all Onkyo TX-NR747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Consulting the Remote Control Code List Find the remote control code in the remote control code list. 1. Look up the Remote Control Codes for the corresponding remote control code. ●● The codes in the Remote Control Code List are those known as of the date of publication and may be changed. ●● The following REMOTE MODE buttons are preprogrammed with remote control codes. BD/DVD: Onkyo Blu-ray Disc/DVD player CD: Onkyo CD player STRM BOX: Apple TV ●● Only TV remote control codes can be entered for TV. ●● Program a remote control code in accordance with the input since each button also works as the input selector. (For example, when the CD player is connected to the CD jack, program the remote control code for the CD player to CD) 2. Press and hold DISPLAY for 3 or more seconds while holding down the REMOTE MODE button to which you want to program the remote control code. ●● The remote indicator lights in the input mode. 3. With the number buttons, enter the 5-digit remote control code within 30 seconds. ●● Programming is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. Try programming again. Operating Other Components with the Remote Controller Remapping the Colored Buttons The colored button assignment on the AV receiver's remote controller can be remapped to match that on the remote controller of the component whose remote control code you programmed to REMOTE MODE. However, you will not be able to remap the colored buttons if Zone 2 is selected. 1. Hold down the REMOTE MODE button to map and A (Red) simultaneously until the remote indicator lights (about 3 seconds). ●● Remapping is possible only for codes included in the categories of the Remote Control Code List (DVD player, TV, etc.) Resetting the REMOTE MODE Buttons You can reset the remote control code registered in the REMOTE MODE button to its default status. This operation can be executed on a single REMOTE MODE button. 1. Press and hold Q for 3 or more seconds while holding down the REMOTE MODE button you want to reset. ●● The remote indicator will light. 2. Within 30 seconds, press the colored buttons from left to right, in the order you want to remap. ●● For example, if the colored buttons on the remote controller of the other component are yellow, green, blue, and red from left to right, press the buttons on the AV receiver's remote controller in that order. ●● Programming is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. Try programming again. ●● Pressing any other button than a colored button cancels the remap operation. 2. Within 30 seconds, press the REMOTE MODE button again. ●● Resetting is complete when the remote indicator flashes twice. To reset all the remote controller settings: While holding down RECEIVER, press and hold Q for 3 or more seconds until the remote indicator stays lit. Within 30 seconds, press RECEIVER again. Resetting is complete when the remote indicator flashes twice. En-54