Optoma EH319UST User manual - Page 21
Installing the TouchBeam module
View all Optoma EH319UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installing the TouchBeam module Step 1: Mounting the TouchBeam module 1. Open top cover with a screwdriver. 1.2 Mount bracket to whiteboard or wall The module must be installed away from the projected image - At least 13.5cm from the base plate - At least 10cm from the bottom of the TouchBeam module 1.3a For short-term demonstration: Adhere double-sided tape (enclosed in accessory box) onto bracket, then paste onto the whiteboard or wall. Note: 7.5 - 13.5cm from bottom of base plate 21
21
Installing the TouchBeam module
Step 1: Mounting the TouchBeam module
1.
Open top cover with a screwdriver.
1.2
Mount bracket to whiteboard or wall
The module must be installed away from the projected image
-
At least 13.5cm from the base plate
-
At least 10cm from the bottom of the TouchBeam module
1.3a For short-term demonstration:
Adhere double-sided tape (enclosed in accessory box) onto bracket, then paste onto the
whiteboard or wall.
Note: 7.5
–
13.5cm from bottom of base plate