Optoma LH150 LH150 UM EN 022020 - Page 15
Effective range, controller might become malfunction.
![]() |
View all Optoma LH150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
SETUP AND INSTALLATION Effective range Infra-Red (IR) remote control sensor is located on the top side of the projector. Make sure the operating angle of the remote control is pointed within ±35° to the IR receiver on the projector. The distance between the remote control and the sensor should not be longer than 6 meters at operating angle 45° and 14 meters at operating angle 0°. Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. Make sure the IR transmitter of the remote control is not being shined by sunlight or fluorescent lamps directly. Please keep the remote controller away from fluorescent lamps for over 2 meters or the remote controller might become malfunction. If the remote control is closed to Inverter-Type fluorescent lamps, it might become ineffective from time to time. If the remote control and the projector are within a very short distance, the remote control might become ineffective. When you aim at the screen, the effective distance is less than 5 meters from the remote control to the screen and reflecting the IR beams back to the projector. However, the effective range might change according to screens. Approx. ±35° English 15
![](/manual_guide/products/optoma-lh150-lh150-um-en-022020-60d0498/15.png)