Optoma LH150 LH150 UM EN 022020 - Page 38
Troubleshooting, Image problems, Other problems
View all Optoma LH150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems N o image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the "Installation" section. Ensure the pins of connectors are not crooked or broken. I mage is out of focus Adjust the Focus Ring on the left side of the projector. Please refer to page 13. Make sure the projection screen is between the required distance from the projector. Please refer to page 35. T he image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format on projector side. If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD. Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player. I mage is too small or too large Move the projector closer to or further from the screen. Select "Image Aspect Ratio" from the Settings menu and try the different settings. I mage has slanted sides: If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. Select "Image V. Keystone" from the Settings menu to adjust the image distortion caused by tilting the projector manually. I mage is reversed Select "Image Projection Mode" from the Settings menu and adjust the projection direction. Other problems T he projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. 38 English