Panasonic BTLH80W BTLH80W User Guide

Panasonic BTLH80W - 7.9" MONITOR Manual

Get Panasonic BTLH80W - 7.9inch MONITOR PDF manuals and user guides View all Panasonic BTLH80W manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic BTLH80W manual content summary:

  • Panasonic BTLH80W | BTLH80W User Guide - Page 1
    Operating Instructions LCD Video Monitor BT-LH80WP Model No. BT-LH80WE Model No. Before operating this product, please read the instructions carefully and save this manual for future use. S0507N0 -M Printed in Japan ENGLISH VQT1H75
  • Panasonic BTLH80W | BTLH80W User Guide - Page 2
    BT-LH80WP) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE limits for a class A digital device, pursuant to Part with the instruction manual, may cause
  • Panasonic BTLH80W | BTLH80W User Guide - Page 3
    Read this first! (For BT-LH80WE) DO NOT REMOVE PANEL COVERS BY UNSCREWING THEM. To reduce the risk of electric shock, do not remove the covers. No user serviceable parts inside. Refer servicing to qualified service personnel. WARNING: • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
  • Panasonic BTLH80W | BTLH80W User Guide - Page 4
    Contents Read this first! (For BT-LH80WP 2 Read this first! (For BT-LH80WE 3 Standard accessory 4 Optional unit 4 Precautions for use 5 Outline 6 Dimensions 6 Controls and Their Functions 7 Front panel 7 Rear panel 8 Supplying the power 9 Using the Anton/Bauer type
  • Panasonic BTLH80W | BTLH80W User Guide - Page 5
    Precautions for use This product has been specially designed for commercial use. As such, it should be used and operated only by persons with related expertise. The liquid crystal parts are fabricated using high-precision technology. The screen has effective pixels that cover more than 99.99% of its
  • Panasonic BTLH80W | BTLH80W User Guide - Page 6
    BT-LH80W is a thin and lightweight liquid crystal monitor designed especially for broadcasting service and business use. It is equipped with a 7.9-inch V (effective display area) liquid crystal display panel. It can be used as a VF (viewfinder) for broadcasting and business cameras made by Panasonic
  • Panasonic BTLH80W | BTLH80W User Guide - Page 7
    VF-VIDEO∗1 : Viewfinder input VIDEO SDI∗2 : Video input : Serial digital interface input ( viewfinder input. ∗2 Can only be selected when the separately sold BT- setting values are loaded when the monitor's power is switched ON. camera. 6 G-TALLY (green) Can be lit by a control signal from
  • Panasonic BTLH80W | BTLH80W User Guide - Page 8
    to the VF (viewfinder) terminal of broadcasting and business cameras made by Panasonic. The unit can be used as the viewfinder for such a camera. 12 GPI input takes precedence. 15 Light control switch This is not used on this monitor. 16 Battery holder This holder is used with a battery made by
  • Panasonic BTLH80W | BTLH80W User Guide - Page 9
    monitor. Using the Anton/Bauer type battery pack Using a V-mount type battery pack 1. Install the Anton/Bauer type of battery pack. Battery pack CAUTION: These servicing instructions are for use by qualified service four screws (length 8 mm (5/16 inch)) supplied with the holder, and then fasten
  • Panasonic BTLH80W | BTLH80W User Guide - Page 10
    Supplying the power (continued) Using an external DC power supply 1. Connect the external DC power supply to the DC IN socket on this unit. DC IN socket External DC power supply 2. Turn "ON" the external DC power supply switch. (Where the external DC power supply has a power switch) 3. Turn "ON"
  • Panasonic BTLH80W | BTLH80W User Guide - Page 11
    unit can be connected to broadcasting and business cameras made by Panasonic and used as a VF (viewfinder). VF cable (Option) DC cable (Option) BT-LH80W VF cable (Option) Part number: BT-CS80G Camera side VF terminal Camera platform ∗2 (commercially available) DC cable∗1 (Option. Included with
  • Panasonic BTLH80W | BTLH80W User Guide - Page 12
    displayed, then either the current input signal is not supported or the "INPUT SELECT" menu setting needs to be level display • When an Anton/Bauer type digital battery is used, battery level is displayed camera settings) • Displayed when there is an improper operation status relative to the camera
  • Panasonic BTLH80W | BTLH80W User Guide - Page 13
    supply voltage and battery level display • DC power supply voltage is displayed. • Battery level is displayed when using an Anton/Bauer type digital battery. • Displayed when the operating status display is not displayed. DC14.0V 50% Menu display [MAIN MENU] MARKER VIDEO CONFIG SYSTEM CONFIG
  • Panasonic BTLH80W | BTLH80W User Guide - Page 14
    How to Use the On Screen Menu (continued) Menu operations 1. Push [MENU] to display the MAIN menu. FUNCTION 1 2 3 INPUT MENU ENTER 3. Push [ , ] to select the sub menu, then push [ENTER]. The setting values in the sub menu change to green. [MARKER] MARKER 16:9 4:3 BACK CENTER GPI PRESET1
  • Panasonic BTLH80W | BTLH80W User Guide - Page 15
    in user data. • Menu settings except for "SETUP LOAD/SAVE" and "REMOTE of CONTROL" (including the button function settings on the front of the monitor) • Screen adjustment values changed in picture adjusting knob Saving user data Loading user data 1. Push [MENU] to display the MAIN menu. 2. Push
  • Panasonic BTLH80W | BTLH80W User Guide - Page 16
    BLUE BIAS RED BIAS GREEN BIAS BLUE RESET GPI INPUT SELECT CONTROL HOURMETER YPBPR ON VF ON VIDEO ON SDI ON CONTROL LOCAL ENABLE OPERATION LCD COMPONENT LEVEL VIDEO/YPBPR SIGNAL TYPE FORMAT NTSC SETUP GPI CONTROL GPI1 GPI2 GPI3 GPI4 GPI5 GPI6 GPI7 GPI8 16
  • Panasonic BTLH80W | BTLH80W User Guide - Page 17
    • The marker is not displayed during VF line operation. • The marker display size is the display size of a camera-recorder, and so is smaller than the previous model (BT- LH900A). ∗1 The setting becomes "ON" when the unit receives marker-related control during REMOTE operation. (Priority goes to
  • Panasonic BTLH80W | BTLH80W User Guide - Page 18
    Main Menu (continued) Types of MARKER 16:9 marker (Displayed when using HD, or when using SD with a 16:9 aspect ratio) The marker is only displayed as a vertical bar. In addition, the section becomes the "MARKER BACK" item. 4:3 marker (Displayed when using SD with a 4:3 aspect ratio) A
  • Panasonic BTLH80W | BTLH80W User Guide - Page 19
    - 63 1) Push [ENTER] (USER changes to blue). 2) Select 0 - 63 with [ , ], and push [ENTER]. ∗2 When "VAR1", "VAR2" or "VAR3" is selected, the monitor switches to WB adjustment mode (→ page 20). ∗3 The following sharpness values can each be set, 1) VIDEO system input line (VIDEO)(Factory settings are
  • Panasonic BTLH80W | BTLH80W User Guide - Page 20
    Main Menu (continued) About IP Mode By selecting "MODE1", you can convert IP through Frame Interpolation. This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused 1 frame delay or more. Factory preset setting value is "MODE1" recommended for
  • Panasonic BTLH80W | BTLH80W User Guide - Page 21
    BACKLIGHT. Used to adjust CONTRAST. Used to adjust the LCD backlight level. CONT./BACK displays "-" while BACKLIGHT settings item. ∗1 Functions as CONTINUE when (warning of improper operation status for the camera settings) is displayed or when the P-P (PIXEL TO PIXEL) status is
  • Panasonic BTLH80W | BTLH80W User Guide - Page 22
    the tally lamp on the rear of the monitor. Lamp lights when TALLY control from a GPI/camera is ON. Lamp does not light. Used to set ZEBRA information in the camera. Sets the information to ON. OFF in INPUT SELECT.) ∗2 A function to be used with future Panasonic camera-recorders. 22
  • Panasonic BTLH80W | BTLH80W User Guide - Page 23
    display. ∗5 PIXEL POSITION is not backed up. It is always CENTER when the power supply is switched ON. ∗6 Only enabled when TALLY control from the camera is ON. ∗7 During FOCUS-IN-RED operation, the detection sensitivity can be changed with the FOCUS-R knob. The setting range is from 0 to 30, with
  • Panasonic BTLH80W | BTLH80W User Guide - Page 24
    Main Menu (continued) Restrictions on various FUNCTION settings Under the following conditions, various settings are disabled. Setting Disabling condition SD ASPECT Does not operate while GPI items are being set. Does not operate during PIXEL TO PIXEL operation. Does not operate during HD
  • Panasonic BTLH80W | BTLH80W User Guide - Page 25
    to [FUNCTION3] buttons). Normal window Press the FUNCTION button assigned with the WFM function once. Press the same button again. WFM display WFM (Wave Form Monitor) The window is displayed in 16:9 aspect. Restrictions on WFM WFM is not displayed while using the PIXEL TO PIXEL or FOCUS-IN-RED
  • Panasonic BTLH80W | BTLH80W User Guide - Page 26
    Main Menu (continued) Display position sequence during an HD signal 1080i input PIXEL POS.+: 1)→2)→3)→4)→5)→6)→7)→8)→9)→1 PIXEL POS.-: 1)→9)→8)→7)→6)→5)→4)→3)→2)→1 1) CENTER 2) LEFT TOP 3) MID TOP 4) RIGHT TOP 5) RIGHT MID 6) RIGHT BOTTOM 7) MID BOTTOM 8) LEFT BOTTOM Display position
  • Panasonic BTLH80W | BTLH80W User Guide - Page 27
    -IN-RED When the FOCUS-IN-RED function is used, the section that is being focused is displayed in an easy-to-understand red, making camera focus adjustments easy. Each time the button from [FUNCTION1] to [FUNCTION3] to which the FOCUS-IN-RED function is assigned is pushed, the display is
  • Panasonic BTLH80W | BTLH80W User Guide - Page 28
    Main Menu (continued) GPI The "GPI CONTROL" item is used to set enable/disable of all GPI functions, and assigns functions to each of the GPI terminal pins (→ page 31). The underlined values are factory preset setting values. Sub menu Settings Explanation GPI CONTROL DISABLE ENABLE GPI
  • Panasonic BTLH80W | BTLH80W User Guide - Page 29
    to select the VF input mode. Selects the VIDEO signal. Selects the YPBPR (component) signal. Used to select the signal output from the camera. Selects the HD signal. Selects the SD signal. Used to set the VIDEO line to the INPUT SELECT button.∗1 Used to select the
  • Panasonic BTLH80W | BTLH80W User Guide - Page 30
    ". When the lock is engaged, the key mark is displayed on the screen. [MAIN MENU] MARKER Key mark HOURMETER Sub menu OPERATION LCD Settings XXXXXXH∗1 XXXXXXH∗1 The underlined values are factory preset setting values. Explanation Used to display the power distribution time. Used to display the
  • Panasonic BTLH80W | BTLH80W User Guide - Page 31
    REMOTE Specifications REMOTE operation is possible on this monitor using the GPI/RS-232C terminal. GPI terminal Each of the items in the GPI screen are compatible with the following terminals. You can assign
  • Panasonic BTLH80W | BTLH80W User Guide - Page 32
    RS-232C. RS-232C Terminal (9P) PC Side Pin number Signal 1 N.C. 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 N.C. (Straight) BT-LH80W Side Pin number Signal 1 N.C. 2 TXD 3 RXD 4 DSR 5 GND 6 DTR 7 CTS 8 RTS 9 N.C. RS-232C REMOTE operation method Connectors and
  • Panasonic BTLH80W | BTLH80W User Guide - Page 33
    REMOTE Specifications (continued) Setting command No. Command Explanation 1 IIS Input switch VPC 2 Image quality adjustment 3 OBO 4 VBL 5 DCH 6 DSD DMK Blue only Backlight settings Cross hatch display Status display Marker settings Data 0: SDI 3: YPBPR 2: VIDEO 5: VF CON00-60 : Contrast
  • Panasonic BTLH80W | BTLH80W User Guide - Page 34
    REMOTE Specifications (continued) Query command No. Command Explanation QIS Input selection 1 Data QPC 2 3 QBO QMK∗1 Image quality adjustment Blue only Marker CON: Contrast setting value BRI: Brightness setting value CRO: Chroma setting value PHA: Phase setting value MAK: Area marker 4 QCT
  • Panasonic BTLH80W | BTLH80W User Guide - Page 35
    if a malfunction occurs, it is essential that general servicing and maintenance servicing are conducted on a regular basis, to prevent malfunctions and accidents caused by the deterioration of consumable parts, and to keep the monitor working normally. 2. Standard maintenance time guidelines and
  • Panasonic BTLH80W | BTLH80W User Guide - Page 36
    the camera. monitor can cause a malfunction. Specifications GENERAL Power supply: DC 12 V (11.0 V to 17.0 V) Input current: 1.5 A indicates safety information. Dimensions (W × H × D): Weight: Operating temperature: Operating humidity: Storage temperature: 218 mm × 166 mm × 64.7 mm (8-9/16 inches
  • Panasonic BTLH80W | BTLH80W User Guide - Page 37
    /60i signal is input, displayed as 1080/60i. Other various marker displays will use the 1080/60i marker. ∗3 Enabled when the separately sold BT-YA80G is installed. Weight and dimensions are approximate. Specifications are subject to change without notice. Information on Disposal for Users of Waste
  • Panasonic BTLH80W | BTLH80W User Guide - Page 38
    . Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
Operating Instructions
LCD Video Monitor
Before operating this product, please read the instructions carefully and save this manual for
future use.
S0507N0 -M
Printed in Japan
VQT1H75
ENGLISH
Model No.
BT-LH80WP
Model No.
BT-LH80WE