Panasonic BTLH80W BTLH80W User Guide - Page 20

About IP Mode, WB adjustment mode, Sub menu, Settings, Explanation, COLOR TEMP., GAIN RED, GAIN

Get Panasonic BTLH80W - 7.9inch MONITOR PDF manuals and user guides View all Panasonic BTLH80W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Main Menu (continued) About IP Mode By selecting "MODE1", you can convert IP through Frame Interpolation. This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused 1 frame delay or more. Factory preset setting value is "MODE1" recommended for normal use. Depending on images, in very rare cases, noise may occur on the screen. In such a case, "MODE 2" is recommended. By selecting "MODE2", you can convert IP through Field Interpolation. Since MODE2 interpolates only within each Field, it is suitable to confirm interlace condition. Depending on still images, etc., flickers may occur on the screen. In such a case, "MODE1" is recommended. WB adjustment mode You can adjust "WHITE BALANCE VAR1" - "WHITE BALANCE VAR3" (WB) by selecting "VAR1" - "VAR3" in "COLOR TEMP." in the "VIDEO CONFIG" menu. Sub menu COLOR TEMP.∗1 GAIN RED GAIN GREEN GAIN BLUE BIAS RED BIAS GREEN BIAS BLUE RESET Settings USER 0 - 63 D93 D65 D56 0 - 511 (Factory presets are values for color temperature .) ∗ The presets are values adjusted before shipment from factories. -512 - 511 (Factory preset settings: 0) The underlined values are factory preset setting values. Explanation Used to select the color temperature that will become the basis for adjustments. Adjustable settings 0 - 63 (color temperature around 3000K - 9300K) Color temperature around 9300K Color temperature around 6500K Color temperature around 5600K GAIN elements for RED are adjusted.∗2 GAIN elements for GREEN are adjusted.∗2 GAIN elements for BLUE are adjusted.∗2 BIAS elements for RED are adjusted.∗2 BIAS elements for GREEN are adjusted.∗2 BIAS elements for BLUE are adjusted.∗2 "GAIN RED" - "BIAS BLUE" values are reset to color temperatures values selected in "COLOR TEMP.". ∗1 When "COLOR TEMP." is selected and [ENTER] is pressed following item change, the display changes to the confirmation screen. Selecting "YES" and pressing [ENTER] on this screen return GAIN and BIAS values to the selected color temperature values. ∗2 When adjusting, the item display moves to the lower part of the screen. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
20
Main Menu
(continued)
About IP Mode
By selecting “MODE1”, you can convert IP through Frame Interpolation.
This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused
1 frame delay or more.
Factory preset setting value is “MODE1” recommended for normal use. Depending on images, in very rare
cases, noise may occur on the screen. In such a case, “MODE 2” is recommended.
By selecting “MODE2”, you can convert IP through Field Interpolation.
Since MODE2 interpolates only within each Field, it is suitable to confirm interlace condition.
Depending on still images, etc., flickers may occur on the screen. In such a case, “MODE1” is recommended.
WB adjustment mode
You can adjust “WHITE BALANCE VAR1” - “WHITE BALANCE VAR3” (WB) by selecting “VAR1” - “VAR3” in
“COLOR TEMP.” in the “VIDEO CONFIG” menu.
The underlined values are factory preset setting values.
Sub menu
Settings
Explanation
COLOR TEMP.
∗
1
USER 0 - 63
D93
D65
D56
Used to select the color temperature that will become the
basis for adjustments.
<USER 0 - 63>Adjustable settings 0 - 63
(color temperature around 3000K - 9300K)
<D93>
Color temperature around 9300K
<D65>
Color temperature around 6500K
<D56>
Color temperature around 5600K
GAIN RED
0 - 511
(Factory presets
are values for color
temperature <D65>.)
∗
The presets are
values adjusted
before shipment from
factories.
GAIN elements for RED are adjusted.
∗
2
GAIN GREEN
GAIN elements for GREEN are adjusted.
∗
2
GAIN BLUE
GAIN elements for BLUE are adjusted.
∗
2
BIAS RED
–512 - 511
(Factory preset settings:
0)
BIAS elements for RED are adjusted.
∗
2
BIAS GREEN
BIAS elements for GREEN are adjusted.
∗
2
BIAS BLUE
BIAS elements for BLUE are adjusted.
∗
2
RESET
“GAIN RED” - “BIAS BLUE” values are reset to color temperatures
values selected in “COLOR TEMP.”.
∗
1
When “COLOR TEMP.” is selected and [ENTER] is pressed following item change, the display changes to the
confirmation screen. Selecting “YES” and pressing [ENTER] on this screen return GAIN and BIAS values to the
selected color temperature values.
∗
2
When adjusting, the item display moves to the lower part of the screen.