Panasonic BTLH80W BTLH80W User Guide - Page 21

Main Menu (continued) SYSTEM CONFIG Sub menu CONT. /BACK. Settings BACKLIGHT CONTRAST BACKLIGHT 0 - 60 PEAKING/PHASE PEAKING PHASE STATUS DISPLAY CONTINUE 3SEC OFF∗1 OFF BATTERY REMAIN OFF ON SETUP LOAD SETUP SAVE PWR ON SETUP FACTORY USER1 USER2 USER3 USER4 USER5 USER1 USER2 USER3 USER4 USER5 LAST FACTORY USER1 USER2 USER3 USER4 USER5 The underlined values are factory preset setting values. Explanation Used to select the function to be assigned to CONT/B.LIGHT (a knob on the front panel). Used to adjust BACKLIGHT. Used to adjust CONTRAST. Used to adjust the LCD backlight level. CONT./BACK displays "-" while BACKLIGHT settings are performed. Used to select the function to be assigned to PEAK/PHASE (a knob on the front panel). Assigns to the PEAKING function. Assigns to the PHASE function. Used to set the display time for the status display. Always displayed. Displayed for 3 seconds. Not displayed. Used to select whether or not to display the battery level. Not displayed. Displayed. Used to load the saved factory preset setting values (FACTORY) or user data (USER 1 - USER 5). The factory preset settings. The saved USER data ∗2. When the unit is shipped from the factory, the USER 1 to 5 data items are the same as the factory preset values. Used to save user data. Up to 5 sets of user data can be saved, which include the current setting values for the menu and picture adjusting knobs. Used to select the settings for when the power supply is switched ON. Starts up with same settings as the last time the power supply was switched OFF. Starts up with the FACTORY settings. Starts up with the settings that are saved in a USER item. ∗1 Functions as CONTINUE when (warning of improper operation status for the camera settings) is displayed or when the P-P (PIXEL TO PIXEL) status is displayed. ∗2 USER saving is not possible when CONTROL is set to REMOTE. 21