Panasonic BTLH80W BTLH80W User Guide - Page 29

Main Menu (continued) INPUT SELECT Sub menu YPBPR COMPONENT LEVEL Settings ON OFF SMPTE B75 B00 VF VIDEO/YPBPR SIGNAL TYPE VIDEO FORMAT NTSC SETUP SDI ON OFF VIDEO YPBPR HD SD ON OFF AUTO NTSC PAL 00 75 ON OFF The underlined values are factory preset setting values. Explanation Used to set the YPBPR line to the INPUT SELECT button.∗1 Used to select the input level for the YPBPR (component) signal. When the signal level specified in SMPTE is Chroma 100 IRE, PB, PR=0.7Vp-p Select this when connecting a betacam or similar devices with a 7.5 IRE setup level. Select this when connecting a betacam or similar devices with a 0 IRE setup level. Used to set the VF line to the INPUT SELECT button.∗1 Used to select the VF input mode. Selects the VIDEO signal. Selects the YPBPR (component) signal. Used to select the signal output from the camera. Selects the HD signal. Selects the SD signal. Used to set the VIDEO line to the INPUT SELECT button.∗1 Used to select the format for VIDEO input.∗2 NTSC or PAL is selected automatically. NTSC PAL Used to set the setup level for NTSC. Select this when the signal is at a 7.5 IRE setup level. Select this when the signal is at a 0 IRE setup level. Used to set the SDI line to the INPUT SELECT button.∗1∗3 ∗1 When an SDI input unit (option) is installed, it is not possible to switch OFF all the 4 input lines. An OFF setting cannot be made for the 4th input line. When there is no SDI input unit (option), it is not possible to switch OFF all the following 3 input lines: YPBPR, VIDEO or VF. An OFF setting cannot be made for the 3rd input line. ∗2 Although the factory preset setting is AUTO, we recommend specifying a format because there is a risk of the input signal being affected by external noise. ∗3 When there is no SDI input unit (option), the SDI item is displayed in gray and cannot be set. 29