Panasonic BTLH80W BTLH80W User Guide - Page 25
Restrictions on WFM
View all Panasonic BTLH80W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Main Menu (continued) About WFM You can display the wave form monitor using the "WFM" function. The display changes each time you press one of the buttons, [FUNCTION1] to [FUNCTION3] (→ page 23), assigned with the [WFM] function (To use the "WFM" function, you must assign it to one of the [FUNCTION1] to [FUNCTION3] buttons). Normal window Press the FUNCTION button assigned with the WFM function once. Press the same button again. WFM display WFM (Wave Form Monitor) The window is displayed in 16:9 aspect. Restrictions on WFM WFM is not displayed while using the PIXEL TO PIXEL or FOCUS-IN-RED function. About PIXEL TO PIXEL and PIXEL POS. +/- Using the "PIXEL TO PIXEL" function, you can confirm a picture with the actual pixel count (only when the input is an HD signal). First, press one of the buttons, [FUNCTION1] to [FUNCTION3] (→ page 23), assigned with the "PIXEL TO PIXEL" function to turn it "ON". With the function on, press another one of the buttons, [FUNCTION1] to [FUNCTION3] (→ page 23), assigned with "PIXEL POS. +" or "PIXEL POS. -". Each time the button assigned with "PIXEL POS. +/-" is pressed, the signal display position switches. Sub menu Settings The underlined values are factory preset setting values. Explanation PIXEL TO PIXEL PIXEL POS.+∗1 PIXEL POS.-∗1 OFF ON CENTER LEFT TOP LEFT MID LEFT BOTTOM MID TOP MID BOTTOM RIGHT TOP RIGHT MID RIGHT BOTTOM Used to set the display of the screen size to the input signal size. Used to set the signal display position when PIXEL TO PIXEL is on. HD signal 1080i center top left Screen left center*2 bottom left Screen top center*2 Screen bottom center*2 top right Screen right center*2 bottom right HD signal 720P center top left top right bottom right bottom left ∗1 PIXEL POS. + and - operate as follows. ∗2 Refer to the next page. SD signal center 25