Panasonic CF- Notebook Computer - Page 38

Reinstalling Software 9 At the confirmation message , press Y . The computer will reboot, and the operation of reinstallation for the hard disk starts automatically. Windows 2000 When [Insert media 2] is displayed, insert Product Recovery CD-ROM 2 into the CD-ROM drive and immediately select [OK]. NOTE If [OK] is not immediately selected: [The media does not contain the correct file] may be displayed. In such cases, [Insert media 2...] is displayed again when [OK] is selected. Confirm that Product Recovery CD-ROM 2 has been inserted by opening the tray of the CD-ROM drive, then close the tray and immediately select [OK]. 10 After the reinstallation procedure completes, the following message will appear on the display. Remove the Product Recovery CD-ROM* and FIRSTAID FD, then restart the computer by pressing Ctrl + Alt + Del . (When using the USB floppy disk drive, disconnect it.) Windows 98 * Windows 2000 : Product Recovery CD-ROM2 All data on the whole HDD has been restored to the factory default. After removing floppy disk and the Product Recovery CD-ROM, restart the computer and set up Windows again. Windows 2000 Windows2000 install wizard will start after reboot. Restore process will execute more after Windows2000 install wizard. Restart the computer after removing Product Recovery CD-ROM. Troubleshooting 38