Panasonic CF-H1ADBBGJM Reference Manual - Page 5
Maintaining the performance of the screen, Things to keep in mind when using the screen
View all Panasonic CF-H1ADBBGJM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Touch Screen Operation 5 Maintaining the performance of the screen z When the screen becomes dirty, wipe it with a soft cloth The screen is specially treated to prevent dirt from adhering to the surface, so dirt can be removed easily using a dry cloth. If the dirt does not come off easily, breathe on the surface and try again. Do not apply water or solvents to the soft cloth. z Wash the soft cloth when it becomes dirty When the soft cloth becomes dirty, wash it with mild detergent. Do not use bleach or fabric conditioner (softener), or try to sterilize the cloth by boiling. If the soft cloth is dirty, it may be ineffective in cleaning the screen, and in fact may cause dirt to adhere to the screen. z Check the following to prevent the surface of the screen from being scratched z Are you using the digitizer pen or your finger to operate the screen? z Is the surface clean? z Is the soft cloth clean? z Is the tip of the digitizer pen clean? z Is your finger clean? Things to keep in mind when using the screen z Do not touch the screen outside of the LCD display area The input area is defined by the LCD display screen. Touching the screen outside of the display area may result malfunctions or damage to the screen. z Do not apply excessive force to the screen Do not lift the computer while holding the LCD screen, or allow the screen to be twisted. Do not place any objects on the LCD screen. Any of the above may cause the screen glass to break, or may damage the LCD screen. z Operation response may be slower in low temperature environments The screen may respond to operations more slowly when using the computer in temperatures less than 5°C, but this is not a malfunction. Response time will return to normal when the computer is returned to room temperature. z If the cursor jumps to a location other than where the screen was touched, or if the LCD resolution changes, perform the calibration Perform the procedure of "Calibration" (Î page 6).