Panasonic CF-H1ADBBGJM Reference Manual - Page 90

Hardware Diagnostics 90 Regarding the PC-Diagnostic Utility NOTE z For the hard disk drive and memory only, you can select standard diagnostic check or extended diagnostic check. When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check. z You cannot operate the PC-Diagnostic Utility by touching the screen. Operations Select icon External mouse operations Place the cursor above the icon Click the icon Complete the PC-Diagnostics Utility and then restart the computer Click (right click cannot be used) Click (close) Keyboard operations Press Space and then press (( close) cannot be selected) Press Space above the icon Press Ctrl + Alt + Del. Running the Diagnostic Check Run this utility using the default settings in the Setup Utility. If the Setup Utility or other settings will not allow hardware to be executed, the hardware icon will be displayed in gray. 1 Connect the AC adaptor. During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices. 2 Turn on or restart the computer, and press F2 or Del while [Panasonic] boot screen is dis- played. The Setup Utility starts up. z If the password is requested, enter the Supervisor Password. z If you are using the computer after changing the settings from the status at the time of purchase, we recommend that you make a note of the settings that are changed. 3 Press F9. At the confirmation message, select [Yes] and press (Enter).