Panasonic DMP-BD10 Blu-ray Dvd Player - English/ French - Page 18

Playback Control with HDMI (EZ SyncTM HDAVI Control) Control with HDMI (EZ SyncTM HDAVI Control) What is EZ Sync HDAVI Control? EZ Sync HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic television (VIERA) or amplifier/receiver under EZ Sync HDAVI Control.You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details. pIt is recommended that you use Panasonic's HDMI cable. Recommended part number: RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc. EZ Sync HDAVI Control compatible television HDMI IN pNon-HDMI-compliant cables cannot be utilized. HDMI OUT pAfter connecting the unit to a television using an HDMI cable, set "Ctrl with HDMI" to "On" (➡ 23). pSet the EZ Sync HDAVI Control operations on the connected equipment (e.g., television). pTurn on all EZ Sync HDAVI Control compatible equipment, turn the television off and on, and then select this unit's input channel on the connected television so that the EZ Sync HDAVI Control function works properly. Also when the connection or settings are changed, repeat this procedure. EZ Sync HDAVI Control compatible amplifier/receiver This unit AV OUT HDMI IN HDMI AV OUT Please see page 8 (connection ) or 9 (connection ) for detailed setup. Functions made possible with EZ Sync HDAVI Control are... One touch play You can turn on this unit, television and amplifier/receiver, and start playing the disc in the play position with a single press of a button. Press [ONE TOUCH PLAY]. pWhen operating, point the remote control at the remote control signal sensor on the main unit. ONE TOUCH PLAY Automatic input switching When the following operations are performed the television will automatically switch the input channel and displays the corresponding action. -When play starts on the unit -When an action that uses the display screen is performed (e.g., Direct Navigator screen) pWhen [ONE TOUCH PLAY] or [] (PLAY) is pressed on this unit for "Automatic input switching" or NOTE "Power on link", the playback image is not immediately displayed on the screen and it may not be possible to watch the contents from where playback started. In this case, press [] or [] to go back to where playback started. Power on link When the television is off and the following operations are performed, the television will automatically turn on and displays the corresponding action. -When play starts on the unit -When an action that uses the display screen is performed (e.g., Direct Navigator screen) Power off link All connected equipment compatible with EZ Sync HDAVI Control including this unit automatically turns off when you switch the television off. pThis unit automatically turns off even during playback or any other operation. pOnly this unit turns off when you press the power button of the unit or the remote control for shutting it down. Other connected equipment compatible with EZ Sync HDAVI Control stays on. RQT8745 18