Panasonic DMP-BD10 Blu-ray Dvd Player - English/ French - Page 26
Reference, Sound, HDMI connections, Other difficulties with playback - specification
UPC - 037988254569
View all Panasonic DMP-BD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Reference Troubleshooting guide Sound No sound. Low volume. Distorted sound. Cannot hear the desired audio type. Cannot switch audio. pCheck the connections and the "Digital Audio Output" settings. Check the input mode on the amplifier/receiver if you have connected one. pPress [AUDIO] to select the audio. pTurn off V. Surround Sound in the following cases. -When using discs that do not have surround sound effects such as Karaoke discs. -When playing bilingual broadcast programs. p[DVD-A] The disc may have restrictions on the method of audio output. With some multichannel discs, unless the number of connected speakers is the same as the disc's channel specification, audio will not be output properly. Refer to the disc's jacket for more information. pSet "Attenuator" in "Connection" tab to "On" if it causes distortion with AUDIO OUT connections. pMatch the speaker settings with the connected equipment. Change multi channel speaker settings by selecting "Multi-channel" in "Speaker" of "Connection" tab. pThe sound effects will not work when the bitstream signal is output from the HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal. pIf the audio track of the disc was recorded with Dolby TrueHD, it will be output as Dolby Digital audio. pIf the audio track of the disc was recorded with Dolby Digital Plus or Dolby True HD, Dolby Digital audio will be output from the DIGITAL AUDIO OUT terminal. pIf the audio track of the disc was recorded with DTS-HD, it will be output as DTS audio. pThere are discs for which audio cannot be changed because of how the disc was created. pWhen connecting an amplifier/receiver using a coaxial cable, optical digital audio cable or an HDMI cable, you cannot switch the audio if "Dolby Digital" is set to "Bitstream". Set "Dolby Digital" to "PCM" or connect using audio cables. Page 8-10,22 13 20 - 22 22 - - - - - 9, 10, 22 HDMI connections The images from this unit do pTo output video from a device connected with an HDMI cable, set "HDMI Video Mode" to 23 not appear on the television. "On" in the Setup menu. pPicture may not be seen when more than 4 devices are connected with HDMI cables. - Picture is distorted. Reduce the number of connected devices. The 4:3 aspect ratio picture pChange "TV Aspect" type to "16:9". 22 expands left and right. Screen size is wrong. When playing DVD-Video using progressive output, one part of the picture momentarily appears to be doubled up. No sound. Low volume. Distorted sound. Cannot hear the desired audio type. Cannot switch audio. pWhen you use the HDMI AV OUT terminal for video output, follow the steps below for setting. 1 Connect this unit to the TV with any cable except the HDMI cable 2 Set "HDMI Video Mode" to "Off" in the Setup menu p[DVD-A] The disc may have a restriction on the method of audio output. This unit cannot playback multi-channel discs that prevent down-mixing unless the unit is connected with an HDMI cable to an amplifier/receiver supporting the HDCP. Refer to the disc jacket for more information. pAudio may not be heard when more than 4 devices are connected with HDMI cables. Reduce the number of connected devices. pThe sound effects will not work when the bitstream signal is output from the HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal. pTo output audio from a device connected with an HDMI cable, set "HDMI Audio Output" to "On" in the Setup menu. pIf the unit is connected to a television with an HDMI cable and the audio from the 7.1ch AUDIO OUT terminal is output as two channels only, set "HDMI Audio Output" to "Off" in the Setup menu. pIf the sound is distorted when the unit is connected to an amplifier/receiver with the HDMI cable, adjust the settings in "Speaker" in the Setup menu to match the connection. pDepending on the connected equipment, the sound may be distorted if this unit is connected with an HDMI cable. pThe sound effects will not work when the bitstream signal is output from the HDMI AV OUT terminal. pWhen connecting an amplifier/receiver using a coaxial cable, optical digital audio cable or an HDMI cable, you cannot switch the audio if "Dolby Digital" is set to "Bitstream". Set "Dolby Digital" to "PCM" or connect using audio cables. 23 - - - 23 23 22 - - 9, 10, 22 Other difficulties with playback Audio and video momentarily pThis occurs between playlist chapters. - pause. DVD-Video is not played. pYou have set a ratings level to limit DVD-Video play. Change this setting. 21 BD-Video is not played. pYou have set a ratings level to limit BD-Video play. Change this setting. 21 pSome BD-Video can only be output with HDMI. - Alternative soundtrack and pThe languages are not recorded on the disc. - subtitles cannot be selected. pYou may not be able to use the On-screen menu to change the soundtrack and subtitles on 15 some discs. Use the disc's menus to make changes. No subtitles. pSubtitles are not recorded on the disc. - pTurn the subtitles on. Set "Subtitle" on the On-screen menu to "On". 19 pWhen progressive output is on, closed captions cannot be displayed. - The subtitles overlap closed pClear the subtitles. 19 captions recorded on discs. Angle cannot be changed. pAngles can only be changed during scenes where different angles are recorded. - The resume play function does pMemorized positions are canceled when - not work. -press [w] several times. -open the disc tray. RQT8745 -[DVD-A] [CD] [VCD] [MP3]: turn off the power. 26