Panasonic DMP-BD10 Blu-ray Dvd Player - English/ French - Page 7
Main unit, Using remote control, Getting started
UPC - 037988254569
View all Panasonic DMP-BD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Main unit Getting started Control reference guide Getting started POWER OPEN/CLOSE . POWER POWER button (¦/I POWER)(➡ 12) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Disc tray (➡ 12) Display IIlumination lamp Lights when the unit is turned on. OPEN/CLOSE Open/close disc tray (➡ 12) . Search / Skip Search: Press and hold Skip: Press Stop (➡ 12) Pause (➡ 12) Start play (➡ 12) Rear panel terminals (➡ 8-10) Using remote control Batteries Insert so the poles (K and L) match those in the remote control. When closing the lid, insert it from the L (minus) side. Use Remote control signal sensor R6/LR6, AA pDo not use rechargeable type batteries. pDo not mix old and new batteries. pDo not use different types at the same time. pDo not heat or expose to flame. pDo not take apart or short circuit. pDo not attempt to recharge alkaline or manganese batteries. pDo not use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place. 20 30 20 30 7 m (23 feet) directly in front of the unit If you cannot operate the unit or television using the remote control after changing the batteries, please re-enter the codes (➡ 11). RQT8745 7