Panasonic KX FLB801 Mfp Laser Fax - Page 74
Cause & Solution
UPC - 037988809837
View all Panasonic KX FLB801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
9. Help Problem I cannot receive documents automatically. The display shows "CONNECTING...", but faxes are not received. A blank sheet is ejected. The printing quality is poor. The other party complains that they cannot send a document. I cannot select the desired receiving mode. I cannot receive documents even though paper is installed. Cause & Solution L The receiving mode is set to TEL mode. Set to FAX ONLY mode by pressing {FAX AUTO ANSWER}. L The time taken to answer the call is too long. Decrease the number of rings before the unit answers a call (feature #210 on page 60). L Make sure that the Distinctive Ring of feature #430 is set properly (page 42). If you do not subscribe to the Distinctive Ring service offered by your local telephone company, this feature should be OFF. L The incoming call is not a fax. Change the receiving mode to TEL mode by pressing {FAX AUTO ANSWER}. L The other party placed the document in their fax machine the wrong way. Check with the other party. L If documents can be copied properly, the unit is working normally. The other party may have sent a faint document or there may be something wrong with the other party's machine. Ask them to send a clearer copy of the document or to check their fax machine. L Some paper has instructions recommending which side to print on. Try turning the paper over. L You may have used paper with a cotton and/or fiber content that is over 20%, such as letterhead or resume paper. L The remaining toner is low. Replace the toner cartridge (page 76). L To check the drum life and quality, please print the printer test list (page 89). If printing quality is still poor, replace the toner cartridge and drum unit. L The toner save mode is ON (feature #482 on page 60). L The glass or rollers are dirty with correction fluid, etc. Clean them (page 84, 87). Please do not insert a document before correction fluid has dried completely. L The memory is full of received documents due to a lack of recording paper or a recording paper jam. Install paper (page 18) or clear the jammed paper (page 79). L If feature #442 is set to "ALWAYS" (page 64), check the connection between the computer and the unit. L The unit is not in FAX ONLY mode. Press {FAX AUTO ANSWER} repeatedly to turn ON the {FAX AUTO ANSWER} indicator. L If you want to set FAX ONLY mode: - press {FAX AUTO ANSWER} repeatedly to turn ON the {FAX AUTO ANSWER} indicator. L If you want to set TEL mode: - press {FAX AUTO ANSWER} repeatedly to turn OFF the {FAX AUTO ANSWER} indicator. L The Distinctive Ring of feature #430 is activated (page 42). L Feature #442 is activated and the received fax documents are automatically transferred to the computer. View the received documents using the computer (page 56). L Recording paper is installed in the manual input tray. Remove the recording paper from the manual input tray. 72 For assistance, please visit http://www.panasonic.com/consumersupport