Panasonic PTAE8000 Operating Instructions

Panasonic PTAE8000 Manual

Get Panasonic PTAE8000 PDF manuals and user guides View all Panasonic PTAE8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic PTAE8000 manual content summary:

  • Panasonic PTAE8000 | Operating Instructions - Page 1
    Model No. PT-AE8000U Thank you for purchasing this Panasonic product. ■ Before operating this product, please read the instructions (Basic Guide / Functional Manual) carefully and save this manual for future use. ■ Before using your projector, be sure to read "Read this first!" ( pages 6 to 13
  • Panasonic PTAE8000 | Operating Instructions - Page 2
    are the trademarks or registered trademarks of their respective holders. Please note that the operating instructions do not include the ® and TM symbols. Illustrations in these operating instructions • Note that illustrations of the projector may differ from the ones you actually see. Page
  • Panasonic PTAE8000 | Operating Instructions - Page 3
    Features of the Projector Quick Steps Real Live 3D Experience See the relevant page for details. Equipped with 3D (3D motion remaster, 3D double-speed drive technology, and 2D to 3D conversion technology) that help enjoy diverse content in high picture quality. Upgraded brightness and contrast
  • Panasonic PTAE8000 | Operating Instructions - Page 4
    Contents Be sure to read "Read this first!". ( pages 6 to 13) Important Information Preparation Getting Started Basic Operation Important Information Read this first 6 Precautions for use 14 Cautions when transporting 14 Cautions when installing 14 Cautions on use 16 About disposal 16
  • Panasonic PTAE8000 | Operating Instructions - Page 5
    84 Maintenance TEMP and LAMP Indicators 85 Managing the indicated problems 85 Care and replacement 87 Before cleaning the projector / replacing components 87 Cleaning the projector 87 Component replacement 89 Troubleshooting 94 Ceiling mount bracket safeguards 95 Appendix Using VIERA Link
  • Panasonic PTAE8000 | Operating Instructions - Page 6
    . The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: This equipment is equipped with a three-pin grounding-type power plug. Do not
  • Panasonic PTAE8000 | Operating Instructions - Page 7
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Panasonic PTAE8000 | Operating Instructions - Page 8
    near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued objects on top of it or wrap it into a bundle. Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
  • Panasonic PTAE8000 | Operating Instructions - Page 9
    or disassemble the projector. High voltages can cause fire or electric shocks. zz For any inspection, adjustment and repair work, please contact an Authorized Service Center. Do not project an image with the lens cover attached. Doing so can cause fire. Do not allow metal objects, flammable objects
  • Panasonic PTAE8000 | Operating Instructions - Page 10
    Important Information Read this first! WARNING: „„ ACCESSORIES Do not use or handle the batteries improperly, and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire. zz Do not use unspecified batteries. zz Do not disassemble dry cell
  • Panasonic PTAE8000 | Operating Instructions - Page 11
    Important Information Read this first! CAUTION: „„ POWER When disconnecting the power cord, be sure to hold the power plug and power connector. If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks will result. When not using the
  • Panasonic PTAE8000 | Operating Instructions - Page 12
    immediately. Continued use could lead to injury, eye fatigue, or health problems. If you feel any strange skin sensations discontinue use of the 3D Eyewear by connecting it to the USB port of a Panasonic TV that supports 3D video or a Panasonic-certified charger using the charging cable included
  • Panasonic PTAE8000 | Operating Instructions - Page 13
    Important Information end of Read this first Brazil Only Brasil Apenas „„Manuseio de baterias usadas BRASIL Após o uso, as pilhas e /ou baterias poderão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada. Read this first! Cobrir os terminais positivo (+) e
  • Panasonic PTAE8000 | Operating Instructions - Page 14
    Important Information PPrreecacuatiountsiofonr ussefor use ■■Be sure to use the projector after removing the packaging material, such as the fastening tapes and protective sheet. Take proper care when disposing of the removed packaging material. Cautions when transporting zzEnsure that the supplied
  • Panasonic PTAE8000 | Operating Instructions - Page 15
    ■■When using an infrared communications device If you use infrared communication devices (such as infrared cordless headphones or an infrared wireless mic), communication problems (such as noise) may occur. Therefore, use such devices in a location far away enough from the projector so as to have no
  • Panasonic PTAE8000 | Operating Instructions - Page 16
    Important Information Precautions for use Cautions on use ■■In order to view clear video images zzClear, high contrast video can be viewed when curtains are closed and lights near the screen are extinguished in order to stop light from reaching the screen. zzIn some rare cases, depending on the
  • Panasonic PTAE8000 | Operating Instructions - Page 17
    : 2 CD-ROM: 1 (TXFQB02THHZ) (For remote control unit) Attention zzDispose of the packaging appropriately after removing from the product. zzContact an Authorized Service Center if you lose any of the included items. zzThe model number of accessories and optional accessories may be changed without
  • Panasonic PTAE8000 | Operating Instructions - Page 18
    Preparation AAbbouotuyotuyr opruojrecptorrojector Remote control ■■Top Remote control signal transmitter Send remote control signal. Point at the remote control receiver part on the projector when using. ■■Front With the switch of the projector turned , switch between the standby
  • Panasonic PTAE8000 | Operating Instructions - Page 19
    Preparation Projector body ■■Top and front view Color sensor window However, this projector is not equipped with a color sensor. Temperature indicator Lamp indicator Power indicator Air exhaust port Remote control signal receiver Projection lens Lens cover Protects the projection lens from dust and
  • Panasonic PTAE8000 | Operating Instructions - Page 20
    About your projector Back and bottom view Security slot The security slot is compatible with the Kensington MicroSaver Security System. Air intake port Preparation Connecting terminals AC IN Connect the power cord included. Lens cover attachment hole Main power Switch the projector on/off.
  • Panasonic PTAE8000 | Operating Instructions - Page 21
    ceilings) and ET-PKA110S (for low ceilings)). zzUse only the ceiling mount brackets specified for this projector. zzRefer to the installation manual for the ceiling mount bracket when you install the bracket and the projector. Attention To ensure projector performance and security, installation of
  • Panasonic PTAE8000 | Operating Instructions - Page 22
    Setting up Projection related Install the projector with reference to the figure below and the projection distance. You can adjust the display size and display position according to the screen size and screen position. Projection screen Screen Screen Getting Started L (LW - LT) *1 Projection
  • Panasonic PTAE8000 | Operating Instructions - Page 23
    Getting Started Setting up Projection screen size 16:9 in 2.35:1 size*2 Screen Diagonal (SD) 1.27 m 1.52 m 1.78 m 2.03 m 2.29 m 2.54 m 3.05 m 3.81 m 5.08 m 6.35 m 7.62 m (50") (60") (70") (80") (90") (100") (120") (150") (200") (250")*1 (300")*1 Minimum distance (LW) 1.16 m (3' 10") 1.40 m
  • Panasonic PTAE8000 | Operating Instructions - Page 24
    Setting up Lens shift and positioning If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position by moving the lens shift dials within the shift range of the lens. ■■Adjusting the lens shift 1) Remove the lens shift cover. zzSee "About
  • Panasonic PTAE8000 | Operating Instructions - Page 25
    Setting up ■■Projector location range The setting position can be adjusted within the following range. See "Projection related" regarding adjustment of the projection screen height (SH) and width (SW). ( page 22) ●● Projector setting range when the screen position is fixed Projector Projector
  • Panasonic PTAE8000 | Operating Instructions - Page 26
    Getting Started CCoonnnencteiocnstions Before connecting to the projector zzRead and follow the operating and connecting instructions of each peripheral device. zzThe peripheral devices must be turned off. zzIf not provided or sold separately with each peripheral device, obtain the connection
  • Panasonic PTAE8000 | Operating Instructions - Page 27
    to connect with DVI devices via an HDMI/DVI conversion adapter, but some devices may not project the image properly or other such problems could be encountered. zzWhen connecting to a serial terminal, see "Serial terminal". ( page 102) zzIf you use a computer that has a resume function (last memory
  • Panasonic PTAE8000 | Operating Instructions - Page 28
    SSwwitcithcinhgitnhegprtohjeectoprroonj/oeffctor on/off Power cord Use the power cord included to prevent removal of the power cord and make sure it is fully inserted into the projector. Make sure the switch is on the side before connecting the power cord. Use the power cord
  • Panasonic PTAE8000 | Operating Instructions - Page 29
    Switching the projector on/off Switching on the projector Check external device connections before switching the projector on. Power indicator 3) 5) 4) 1) Connect the power cord to the projector. 2) Connect the power plug to an outlet. 3) Press the side of the switch to turn on
  • Panasonic PTAE8000 | Operating Instructions - Page 30
    Switching the projector on/off Switching off the power Carefully check the status of the power indicator before operating. Power indicator 4) 1) - 3) 1) Press the power < / | > button. zzThe confirmation message is displayed. ▲ ▼ 2) Select [OK] with the buttons. 3) Press the button (
  • Panasonic PTAE8000 | Operating Instructions - Page 31
    Projecting an image Projecting an image Check the connections of the external devices ( page 26) and the connection of the power cord ( page 28), and switch on the power ( page 29), to start projecting. Select the video for projection, and adjust appearance of the projected image. Selecting the
  • Panasonic PTAE8000 | Operating Instructions - Page 32
    RReemmoteoctoentcrool onpterroatlioon peration Selecting the picture mode You can switch to your desired picture mode settings. Press The settings change as follows each time the button is pressed. [NORMAL] [DYNAMIC] [REC709] You can operate the projector with the remote control within a
  • Panasonic PTAE8000 | Operating Instructions - Page 33
    ▲ ▼ Basic Operation Remote control operation Loading a saved setting Displays the [MEMORY LOAD] menu. Press Attention zzSetting can also be performed using the on-screen menu. For details, see [MEMORY LOAD] in the [PICTURE] menu. ( page 59) Displaying the [VIERA LINK] menu You can control some
  • Panasonic PTAE8000 | Operating Instructions - Page 34
    to HDMI IN 1/HDMI IN 2/HDMI IN 3. RGB signal and [COMPUTER IN] COMPONENT signals (YCBCR/ YPBPR) from the device connected to COMPUTER IN. When [INPUT GUIDE] on the [OPTION] menu is set to [DETAILED] ( page 77), graphical guidance will be displayed on the upper right of the projected image, and
  • Panasonic PTAE8000 | Operating Instructions - Page 35
    with this projector. See page 101 for the 3D image signals supported. Supported 3D Eyewear (as of September 2012) Panasonic TY-EW3D3 Series (rechargeable temperatures. Follow the operation temperature range specified in the operating instructions for the 3D Eyewear. zzIt may be difficult to view
  • Panasonic PTAE8000 | Operating Instructions - Page 36
    in some cases. zzThe 3D Eyewear cannot exhibit sufficient performance at high or low temperature. Follow the operation temperature range noted in the operating instructions for the 3D Eyewear. zzWear the 3D Eyewear correctly. If they are worn upside down or backwards, the solid body image will not
  • Panasonic PTAE8000 | Operating Instructions - Page 37
    Menu navigation Menu navigation ▲ ▼ Settings Navigating through the menu ■■Operating procedure Press 1) Press the button on the remote control or in the controls of the projector. zzThe main menu is displayed. PICTURE MODE NORMAL PICTURE CONTRAST 0 BRIGHTNESS 0 POSITION COLOR 0
  • Panasonic PTAE8000 | Operating Instructions - Page 38
    Menu navigation Menu list The on-screen menu is used for settings and adjustments on this projector. See "Navigating through the menu" for details of on- screen menu operation. ( page 37) The submenu of the main menu is displayed, and setting/adjustment for each item can be performed. ■■[PICTURE
  • Panasonic PTAE8000 | Operating Instructions - Page 39
    ■■[LANGUAGE] [DEUTSCH] [FRANÇAIS] [ESPAÑOL] [ITALIANO] [PORTUGUÊS] [SVENSKA] [NORSK] [DANSK] [POLSKI] [ ] [MAGYAR] [] [] [ENGLISH] [ தจ ] Language ■■[3D SETTINGS] Submenu items [SCREEN SIZE] [3D INPUT FORMAT] [LEFT/RIGHT SWAP] [3D PICTURE BALANCE] [2D TO 3D] [3D EYEWEAR
  • Panasonic PTAE8000 | Operating Instructions - Page 40
    [[PPICICTUTRUE]RmEen]umenu ▲ ▼ Select [PICTURE] from the main menu of "Navigating through the menu" ( page 37), and choose an item from the submenu. zzAfter selecting an item, adjust the image with the buttons. Remote control Projector controls [PICTURE MODE] You can use these preset parameter
  • Panasonic PTAE8000 | Operating Instructions - Page 41
    [PICTURE] menu ▲ ▼ Settings [COLOR TEMPERATURE] You can adjust the color temperature if the white areas of the projected image are bluish or reddish. Less bluish Less reddish zzSetting range: -6 to +6 [SHARPNESS] With regards to the input signal, adjust video sharpness using one of [SIMPLE]
  • Panasonic PTAE8000 | Operating Instructions - Page 42
    [PICTURE] menu ■■[MONITOR POSITION] You can set the display position of the input waveform during the FULL SCAN display. Switch settings Switch settings ■■[AUTO ADJUST] The luminance level of the output signal from a connected external device is automatically adjusted by setting the automatic
  • Panasonic PTAE8000 | Operating Instructions - Page 43
    ▲ ▼ Settings 1) Adjust [FULL SCAN(Y)] / [SINGLE LINE SCAN(Y)]. ▲ ▼ zzSet on [PICTURE] and use the buttons to adjust [BRIGHTNESS] and then [CONTRAST]. [BRIGHTNESS] [CONTRAST] Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) zzSetting range: −32 to +32 Adjust the top line of the
  • Panasonic PTAE8000 | Operating Instructions - Page 44
    [PICTURE] menu [SPLIT ADJUST] You can perform image adjustment for some [PICTURE] menu items while displaying a certain area of the frozen image in a split window. 1) Press the button. zzThe [SPLIT ADJUST] menu is displayed. PICTURE POSITION SPLIT ADJUST AREA SELECT SPLIT ADJUST MODE
  • Panasonic PTAE8000 | Operating Instructions - Page 45
    (including converting 2D to 3D), the [SPLIT ADJUST] cannot be executed. [ADVANCED MENU] You can perform more detailed image adjustment manually. Press the button zzThe [ADVANCED MENU] menu is displayed. ADVANCED MENU PICTURE GAMMA ADJUSTMENT ADVANCED 1 CONTRAST R 0 POSITION CONTRAST
  • Panasonic PTAE8000 | Operating Instructions - Page 46
    [PICTURE] menu 3) Press the ▲▼ buttons to select [START ADJUSTMENT], and press the button. zzThe [ADVANCED ADJUST] menu appears. PICTURE POSITION LANGUAGE 3D SETTINGS GAMMA ADJUSTMENT ADJUSTMENT MODE GAMMA HIGH GAMMA MID GAMMA LOW START ADJUSTMENT GAMMA NAME CHANGE INITIALIZE LENS
  • Panasonic PTAE8000 | Operating Instructions - Page 47
    the button to set the [OPERATION MODE] to [INPUT ADJUSTMENT]. See the operation guide to check if the current status is the [CHANGE POINT] mode or the [INPUT ADJUSTMENT] mode. Operation Guide CHANNEL CHANGE RESET (RESET ALL: 3 sec) OPERATION MODE RETURN SET AS NEW REF. OUTPUT ADJ
  • Panasonic PTAE8000 | Operating Instructions - Page 48
    [PICTURE] menu c. Adjusting the output level zzIf you press the ▲▼ buttons, you can adjust the output level of the currently selected point. AzDVzAONuCEtpDuAtDlJeUvSeTl can be adjusted for each color on PICTURE GAMtMhAeP[RYE]S[ERT][G][B] scree0n.0. REFERENCE POINTS ON POSITION Ex: When the ▲
  • Panasonic PTAE8000 | Operating Instructions - Page 49
    [PICTURE] menu Example) When the data for gamma preset value +0.40 and gamma preset value 0.00 is combined 1AD. VSAeNtC[EGDAAMDJMUSAT PRESET] to +0.40, display the PICTURE GAaMdMjuAsPtRmEeSnEtTscreen for an+y0.o40ne of [Y], [R], [G], and [B], REoFrERthEeNnCEpPreOsINsTSthe button
  • Panasonic PTAE8000 | Operating Instructions - Page 50
    [PICTURE] menu ●●Initialize the gamma adjustment results PICTURE POSITION LANGUAGE 3D SETTINGS GAMMA ADJUSTMENT ADJUSTMENT MODE GAMMA HIGH GAMMA MID GAMMA LOW START ADJUSTMENT GAMMA NAME CHANGE INITIALIZE LENS CONTROL OPTION ADVANCED1 1) Press the ▲▼ buttons to select [INITIALIZE] and press
  • Panasonic PTAE8000 | Operating Instructions - Page 51
    . Weaken Strengthen zzSetting range: 0 to +3 Attention zzUse a strong setting when projecting an MPEG video. zzCOMPUTER (RGB) signal is not supported. ■■[FRAME CREATION] You can activate the rendering system for fast motion frames with fewer afterimage. Switch settings Switch settings
  • Panasonic PTAE8000 | Operating Instructions - Page 52
    [PICTURE] menu ■■[COLOR MANAGEMENT] For the selected [PICTURE MODE], you can adjust a selected color individually with [CURSOR] mode or adjust the six color components (Red, Green, Blue, Cyan, Magenta, Yellow) with [RGBCMY] mode. Adjustment results can be saved as a profile and called later. ●●
  • Panasonic PTAE8000 | Operating Instructions - Page 53
    the [COLOR MANAGEMENT] menu. Note zzBase color (C) and post-adjustment color (D) (displayed when [ADJUSTMENT MODE] is set to [RGBCMY]), are intended to be guide colors only. ●●Editing/deleting logs You can edit or delete stored logs. Press the ▲▼ buttons to select [LOG] and press the button
  • Panasonic PTAE8000 | Operating Instructions - Page 54
    [PICTURE] menu zzManaging the stored logs created through the [CURSOR] mode LOG ADJUSTMENT MODE PICTURE MODE POINT1 POINT2 POINT3 POINT4 POINT5 POINT6 POINT7 POINT8 ALL DELETE : CURSOR : NORMAL COLOR TINT BRIGHTNESS +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +
  • Panasonic PTAE8000 | Operating Instructions - Page 55
    [PICTURE] menu ●●Saving a log setting as a profile Save a log setting as a profile. You can save up to six profiles. 1) Press the ▲▼ buttons to select [PROFILE SAVE] and press the button. zzThe [PROFILE SAVE] menu is displayed. 2) Press the ▲▼ buttons to select the number to be saved and
  • Panasonic PTAE8000 | Operating Instructions - Page 56
    which comply with HDMI standard (x.v.Ycc). Switch settings Switch settings [ON] [OFF] Active Inactive Note zzThis function is only available when a signal supporting HDMI standards (x.v.Ycc) is input via an HDMI input terminal and [PICTURE MODE] is set to [REC709]. ■■[DETAIL CLARITY] You can
  • Panasonic PTAE8000 | Operating Instructions - Page 57
    during VIDEO or S-VIDEO signal input] The projector automatically detects the input signal but if an unstable signal is input, set the system manually. Set with a system format that matches the input signal. Switch settings Switch settings The settings change as follows each time the button is
  • Panasonic PTAE8000 | Operating Instructions - Page 58
    Settings [PICTURE] menu ■■[RGB/YCBCR], [RGB/YPBPR] Set this to [AUTO] under normal conditions. If images are not displayed correctly when this is set to [AUTO], set either [RGB] or [YCBCR], [YPBPR] in accordance with the input signal. Switch settings Switch settings The settings change as
  • Panasonic PTAE8000 | Operating Instructions - Page 59
    [PICTURE] menu 5) Press the buttons to select [OK]. 6) Press the button. Note zzPress the button without entering any text to keep the default name ([MEMORY1-16]). ■■[MEMORY LOAD] You can access the details saved through [MEMORY SAVE]. 1/2 MEMORY LOAD PICTURE MEMORY1 MEMORY2
  • Panasonic PTAE8000 | Operating Instructions - Page 60
    [[PPOOSISTIOITNI]OmNen]u menu Select [POSITION] from the main menu in "Navigating through the menu" ( page 37) and choose an item from the submenu. zzAfter selecting an item, use the to adjust the screen position. Remote control Projector controls [DOT CLOCK] This reduces noise that
  • Panasonic PTAE8000 | Operating Instructions - Page 61
    menu [ASPECT] You can switch the image aspect ratio manually when needed. Aspect ratio depends on signals. Switch settings .) are projected. zzWhen a signal is input that uses overseas broadcasting formats, the supported aspect ratio modes differ from the table shown. zzWhen a 3D signal is input
  • Panasonic PTAE8000 | Operating Instructions - Page 62
    [POSITION] menu Aspect Screen Input signal [4:3] Projects at 4:3.  Projection screen Input signal [16:9] Projects at 16:9. (Enlarged horizontally)  Projection screen Aspect [ZOOM] Enlarges while preserving original ratio. The projected video may be clipped in some cases, but the video can
  • Panasonic PTAE8000 | Operating Instructions - Page 63
    adjust and project it properly. Shrink image Enlarge image zzSetting range: 0 to +10 Note zzCOMPUTER signal (exc. movie based signals) is not supported. [KEYSTONE] If the projector is aligned non-perpendicularly to the screen, or if the projection screen has an angled surface, you can correct
  • Panasonic PTAE8000 | Operating Instructions - Page 64
    [[33DDSESTTEINTGTSI]NmGenSu ] menu Either press the button on the remote control or select [3D SETTINGS] from the main menu in "Navigating through the menu" ( page 37) and select the item from a submenu. zzAfter selecting an item, adjust the screen position using the buttons. Remote control
  • Panasonic PTAE8000 | Operating Instructions - Page 65
    [3D SETTINGS] menu Note zzIf a setting other than [AUTO] is selected when the input is switched to HDMI, [3D INPUT FORMAT] is changed to [AUTO] when actions such as turning the power of/on, switching input, or switching the signal are performed on the connected device. See the following table
  • Panasonic PTAE8000 | Operating Instructions - Page 66
    [3D SETTINGS] menu [LEFT/RIGHT SWAP] Switch to [SWAPPED] if you feel discomfort when watching a 3D video with 3D Eyewear. Switch settings Switch settings [NORMAL] [SWAPPED] If the 3D video is being displayed [NORMAL] correctly while the 3D Eyewear is being worn, do not change from [NORMAL]
  • Panasonic PTAE8000 | Operating Instructions - Page 67
    ■■[3D WAVEFORM MONITOR] For easy balance adjustment, use a video device that supports 3D and displays the video output (brightness) level of the 3D video for the left and right eye respectively. 1) Press the button. zzThe [3D
  • Panasonic PTAE8000 | Operating Instructions - Page 68
    [3D SETTINGS] menu 5) Press the buttons to specify the location of the required character to enter and press the button. zzYou can enter up to 16 characters. zzSelect [ALL DELETE] and press the button to erase all input text. If you press the button on the remote control,
  • Panasonic PTAE8000 | Operating Instructions - Page 69
    input from the VIDEO/S-VIDEO terminal. zzFor computer (RGB) signals, only 1 920 x 1 080 and 1 280 x 720 signals are supported. zzIf you project a copyrighted image converted from 2D to 3D by using this function for commercial use in a public place, such as a restaurant or hotel,
  • Panasonic PTAE8000 | Operating Instructions - Page 70
    [3D SETTINGS] menu [3D EYEWEAR BRIGHTNESS] This enables adjusting the brightness for the 3D Eyewear. Switch settings Switch settings [3D IR TRANSMITTER] This controls the 3D IR Transmitter embedded in this projector. Switch settings Switch settings [LIGHT]  [NORMAL] [DARK]  [LIGHT]
  • Panasonic PTAE8000 | Operating Instructions - Page 71
    [3D SETTINGS] menu [3D VIEWING MONITOR] In the 3D video the depth of field effects in front of and into the screen are adjusted while confirming on the monitor display. 1) Press the ◄► buttons to select [MODE1] - [MODE3], and press the button. zzThe parallax adjustment monitor is displayed.
  • Panasonic PTAE8000 | Operating Instructions - Page 72
    [3D SETTINGS] menu The gauge display of the one-dimensional display on the parallax adjustment monitor of [Mode2] or [Mode3] indicates the following content: Blue gauge Displays the maximum screen parallax value of the into Red gauge Displays the maximum value of the in front of screen
  • Panasonic PTAE8000 | Operating Instructions - Page 73
    [LENS CONTROL] menu [LENS CONTROL] menu Select [LENS CONTROL] from the main menu of "Navigating through the menu" ( page 37), and choose an item from the submenu. zzAfter selecting an item, adjust the screen position using the buttons. Remote control Projector controls Note zzDuring the
  • Panasonic PTAE8000 | Operating Instructions - Page 74
    [LENS CONTROL] menu [LENS MEMORY SAVE] This enables saving zoom and focus adjustment position, horizontal video position, vertical video position, adjustment for amount of mask, and aspect settings. LENS MEMORY SAVE PICTURE LENS MEMORY1 LENS MEMORY2 POSITION LENS MEMORY3 LENS MEMORY4 LANGUAGE LENS
  • Panasonic PTAE8000 | Operating Instructions - Page 75
    ■■[LENS MEMORY NAME CHANGE] 1) Press the ▲▼ buttons to select the memory name to be changed. PICTURE POSITION LANGUAGE 3D SETTINGS LENS MEMORY NAME CHANGE LENS MEMORY1 LENS MEMORY2 LENS MEMORY3 LENS MEMORY4 LENS MEMORY5 LENS MEMORY6 LENS CONTROL OPTION 2) Press the button. zz[LENS MEMORY
  • Panasonic PTAE8000 | Operating Instructions - Page 76
    [LENS CONTROL] menu [H-AREA POSITION] You can move the frame area horizontally, such as aligning the right or left frame edge to the screen edge. Moving left Moving right For example, when projecting an overscanned 16:9 projection area at a 4:3 aspect ratio on a 4:3 aspect screen, you can adjust
  • Panasonic PTAE8000 | Operating Instructions - Page 77
    > button. zzThe [ON-SCREEN DISPLAY] menu is displayed. PICTURE POSITION ON-SCREEN DISPLAY INPUT GUIDE OSD DESIGN OSD POSITION LANGUAGE 3D SETTINGS LENS CONTROL OPTION DETAILED TYPE1 CENTER ■■[INPUT GUIDE] Set the display method for the currently selected input port name. This is displayed in
  • Panasonic PTAE8000 | Operating Instructions - Page 78
    ] Signal level used by general external devices Expanded signal level used by some devices Note zzThis may not work correctly with some external devices, and problems such as video not being displayed may occur. Settings 78 - ENGLISH
  • Panasonic PTAE8000 | Operating Instructions - Page 79
    . [3D SHUTTER OUT] Select this for connecting and use of an external 3D IR Transmitter (optional accessory). Note zzRead the operating instructions for the external 3D IR Transmitter (optional accessory) when using a 3D IR Transmitter. zz Output [POWER ON] [SELECT LENS MEMORY 1] [SELECT
  • Panasonic PTAE8000 | Operating Instructions - Page 80
    [OPTION] menu • [BLANK] When [BLANK] is activated, output is 12 V. If the setting is released, output is 0 V. • [RS-232C COMMAND LINK] Receives commands ( page 103) from external device and outputs 12 V. zz Input [POWER ON/OFF] [BLANK] • [POWER ON/OFF] If the trigger input signal from the external
  • Panasonic PTAE8000 | Operating Instructions - Page 81
    [OPTION] menu [LAMP POWER] Switch the lamp intensity according to the usage environment of the projector and its intended use. Switch settings Switch settings [NORMAL] [ECO] When higher luminance is required When lower luminance is sufficient Note zzThe brightness in the [ECO] settings is
  • Panasonic PTAE8000 | Operating Instructions - Page 82
    [OPTION] menu ■■[POWER ON LINK] Specify whether or not to switch the power of the projector on when it is in standby by operating external devices. Switch settings Switch settings ■■[ENERGY SAVING MODE] Specify whether or not to switch the mode of external devices to the mode with minimum power
  • Panasonic PTAE8000 | Operating Instructions - Page 83
    [OPTION] menu [OTHER FUNCTIONS] Press the button. zzThe [OTHER FUNCTIONS] menu is displayed. PICTURE POSITION OTHER FUNCTIONS FREEZE BLANK VIERA LINK LANGUAGE 3D SETTINGS LENS CONTROL OPTION INPUT SELECT HDMI1 IN HDMI2 IN HDMI3 IN COMPUTER IN COMPONENT IN S-VIDEO IN VIDEO IN ■■[FREEZE]
  • Panasonic PTAE8000 | Operating Instructions - Page 84
    [OPTION] menu [INITIALIZE ALL] Return all settings to factory defaults. When you perform this operation, the projector is set to the standby state for initialization. 1) Press the ▲▼ buttons to select [INITIALIZE ALL], and press and hold the button for three seconds or more. zzThe [
  • Panasonic PTAE8000 | Operating Instructions - Page 85
     Temperature indicator Lamp indicator ■■Temperature indicator Indicator status Problem Cause Solution zzIlluminates red during projection. (Alert indicating [REFER TO THE "TEMP indicator" SECTION IN THE OPERATION MANUAL.] is displayed.) zzFlashing red when power is turned off (projection
  • Panasonic PTAE8000 | Operating Instructions - Page 86
    and LAMP Indicators ■■Lamp indicator Indicator status Problem Cause Solution Illuminated red Flashing red Time to replace the illuminated or flashes despite taking the actions above, please contact an Authorized Service Center to have your projector repaired. Maintenance 86 - ENGLISH
  • Panasonic PTAE8000 | Operating Instructions - Page 87
    Care and replacement Care and replacement Before cleaning the projector / replacing components Attention zzTurn off the switch and disconnect the power plug from the wall outlet before cleaning the projector/replacing components. zzFollow the "Switching off the power" procedure when
  • Panasonic PTAE8000 | Operating Instructions - Page 88
    Care and replacement 4) Attach the air filter unit to the projector. zz Attach the air filter unit to the projector using the reverse of the procedure in 2). * Insert the air filter unit into the projector in the direction of the arrow engraved into the air filter UP frame ( ) until it clicks into
  • Panasonic PTAE8000 | Operating Instructions - Page 89
    replace the lamp unit" ( page 90) about the lifespan. Contact your dealer if you wish to purchase a replacement lamp unit (ET-LAA410: Service component). It is recommended that specialized engineers perform lamp unit replacement. Contact your dealer. Attention zzWait until the lamp unit has cooled
  • Panasonic PTAE8000 | Operating Instructions - Page 90
    Care and replacement ■■When to replace the lamp unit The lamp unit is a consumable component. Brightness decreases according to duration of usage, so periodical replacement of the lamp unit is necessary. A rough estimate for the usage period is 4 000 hours, but depending on the characteristics of
  • Panasonic PTAE8000 | Operating Instructions - Page 91
    Care and replacement ■■Lamp unit replacement procedure Attention zzOnce a lamp unit has exceeded its lifespan of 4 000 hours (when [LAMP POWER] is set to [NORMAL]) the projector can only be used for 10 minutes after turning on. ( page 90) zzPerform steps 20) to 23) of the procedure within 10
  • Panasonic PTAE8000 | Operating Instructions - Page 92
    Care and replacement 11) Remove the air filter cover. zzUsing a Phillips screwdriver to turn the fixing screw of the air filter cover until loose and remove the cover. Air filter cover fixing screw Air filter cover 12) Remove the air filter unit. zzHold the grips on the air filter unit, and remove
  • Panasonic PTAE8000 | Operating Instructions - Page 93
    while, the projector enters standby mode. ■■Attaching the top cover Hold the top cover as shown in the diagram below, align the hinge with the support, and while pushing the arm in the direction of the arrow (towards the inner side of the projector), push it into the groove. Arm
  • Panasonic PTAE8000 | Operating Instructions - Page 94
    may be interfering. The picture does not display correctly. zz[TV-SYSTEM] and [RGB/YCBCR] or [RGB/YPBPR] are not selected correctly. zzThere may be a problem with the VCR or other signal source. zzA signal which is not compatible with the projector is being input. Picture from a computer does not
  • Panasonic PTAE8000 | Operating Instructions - Page 95
    qualified technician. zzBe sure to use a torque driver. Do not use an electrical screwdriver or an impact screwdriver. zzSee the installation instructions of the ceiling mount bracket for details. zzThe model number of accessories and optional accessories is subject to change without notice. Bottom
  • Panasonic PTAE8000 | Operating Instructions - Page 96
    equipment using the projector remote control. zzThis projector supports "HDAVI Control 5" function. However, the available terminal. zzWith regards to Panasonic products other than this projector, check the manual for the device to be connected regarding description for "VIERA Link". zzVIERA
  • Panasonic PTAE8000 | Operating Instructions - Page 97
    developed and added. As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed. zzPlease refer to individual manuals for other manufacturers' equipment supporting Link function. zzAbout applicable Panasonic equipment, consult your local Panasonic dealer
  • Panasonic PTAE8000 | Operating Instructions - Page 98
    of this projector. zzIf operation is not possible, check the settings of the device. zzFor details on operating an external device, see the manual of the relevant device. Press the button. Alternatively, select [VIERA LINK] from [OTHER FUNCTIONS] in the [OPTION] menu, and then press
  • Panasonic PTAE8000 | Operating Instructions - Page 99
    THEATER MUTE OPERATE OTHER DEVICE RECORDER ●●[OPERATE OTHER DEVICE] When displaying videos using HDMI input from a third party external device that supports VIERA Link, you can display the remote control screen and control the external device with the projector remote control. 1) Select [OPERATE
  • Panasonic PTAE8000 | Operating Instructions - Page 100
    TTeecchnhicnalicinafolrminatfioonrmation List of compatible signals The following table specifies the types of signals compatible with the projectors. Format: V: VIDEO, S: S VIDEO, R: RGB, Y: YCBCR/YPBPR, H: HDMI Mode SIGNAL MODE NTSC/NTSC 4.43/ PAL-M/PAL60 PAL/PAL-N/SECAM 525i (480i) 625i (
  • Panasonic PTAE8000 | Operating Instructions - Page 101
    3D video signal list When [3D INPUT FORMAT] is set to [AUTO], the 3D signals supported by this projector are the HDMI signals in the table below. Mode FRAME PACKING Format of 3D video signals SIDE BY SIDE 750 (720)/60p ○* ○
  • Panasonic PTAE8000 | Operating Instructions - Page 102
    Technical information Serial terminal The serial port on the connector panel of the projector conforms to the RS-232C interface specification, so the projector can be controlled by a personal computer connected to this port. ■■Connection D-sub 9 pin (male) Serial terminal (female) ■■Pin
  • Panasonic PTAE8000 | Operating Instructions - Page 103
    Technical information ■■Cable specifications (When connected to a personal computer) Projector 1 NC 2 3 4 NC 5 6 NC 7 8 9 NC NC 1 2 3 NC 4 5 NC 6 7 8 NC 9 PC (DTE) ■■Control commands Commands available when controlling this projector from a computer are as follows. <
  • Panasonic PTAE8000 | Operating Instructions - Page 104
    Technical information Command KST DAM OAS OOT Control contents KEYSTONE ADVANCED MENU AUTO SETUP SLEEP Remarks Displays the individual adjustment screen of [KEYSTONE]. Displays the individual adjustment screen of the [ADVANCED] menu operated immediately before this operation. Operates AUTO SETUP.
  • Panasonic PTAE8000 | Operating Instructions - Page 105
    Technical information Command Control contents QPW Power status QIN INPUT signal status QPM QSH QFZ QOT PICTURE MODE status BLANK status FREEZE status OFF TIMER status QWM WAVEFORM status QVX:AGOS0 QVX:AGOS1 QVX:AGOS2 QVX:AGOS3 GAMMA ADJUSTMENT status QVX:AGIS0 QVX:
  • Panasonic PTAE8000 | Operating Instructions - Page 106
    SSppeceifciciaftiiconastions The following table describes the specifications of the projector. Power supply Power consumption Amps AC 100-240 V 50 Hz/60 Hz Less than 310 W During standby (when fan is stopped): 0.08 W 3.8 A - 1.5 A Panel size (diagonal) 18.7 mm (0.74") Aspect ratio 16 : 9 LCD
  • Panasonic PTAE8000 | Operating Instructions - Page 107
    Specifications S-VIDEO IN 1 set, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω VIDEO IN 1 set, RCA pin jack 1.0 V [p-p], 75 Ω Terminals COMPUTER IN COMPONENT IN HDMI IN 1 set, D-sub HD 15-pin (female) (RGB signal) R.G.B. 0.7 V [p-p], 75 Ω G.SYNC 1.0 V [p-p], 75 Ω HD/SYNC*1 TTL high
  • Panasonic PTAE8000 | Operating Instructions - Page 108
    Appendix Specifications Dimensions 108 - ENGLISH 19 (3/4") 345 (13 19/32") 470 (18 1/2") 140 (5 1/2") 14 (9/16") 151 (5 15/16") 116 (4 9/16") 60 (2 3/8") 137 (5 13/32") Unit: mm
  • Panasonic PTAE8000 | Operating Instructions - Page 109
    LEVEL 78 HIGH ALTITUDE MODE 80 H-POSITION 60 I INPUT GUIDE 77 K KEYSTONE 63 L Lamp indicator
  • Panasonic PTAE8000 | Operating Instructions - Page 110
    Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Web Site : http://panasonic.net/avc/projector
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
LCD Projector
Thank you for purchasing this Panasonic product.
■ Before operating this product, please read the instructions (Basic Guide / Functional Manual) carefully and
save this manual for future use.
■ Before using your projector, be sure to read “Read this first!” (
pages
6
to
13).
Operating Instructions
Functional Manual
ENGLISH
TQBJ0466
Model No.
PT-AE8000U