Panasonic PTAE8000 Operating Instructions - Page 57
Cinema Reality], Super White], Tv-system], Switch Settings, Auto], Ntsc], Secam], Ntsc4.43], Pal-n]
View all Panasonic PTAE8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
[PICTURE] menu ■■[CINEMA REALITY] You can switch the automatic image synchronizer on/off for 24 frames a second images, such as movies. Switch settings Switch settings [ON] [OFF] Cinema reality active Cinema reality inactive Note zz[CINEMA REALITY] is effective only with interlace signals. ■■[SUPER WHITE] Intensity information for higher than 100% intensity that is included in the image information is replicated. When it appears that bright whites, such as the clouds or a white T-shirt at a beach in the middle of the summer, are blurred out without any contrast, set this function to [ON] to prevent white peak. Switch settings Switch settings [ON] [OFF] Super white enabled. Super white disabled. Note zzThis function is disabled under the following conditions: - When [SPLIT ADJUST] is used for adjustment - For other than HDMI1, HDMI2, and HDMI3 input - When the [HDMI SIGNAL LEVEL] is set to [EXPAND] ■■[TV-SYSTEM] [Only during VIDEO or S-VIDEO signal input] The projector automatically detects the input signal but if an unstable signal is input, set the system manually. Set with a system format that matches the input signal. Switch settings Switch settings The settings change as follows each time the button is pressed. [AUTO] [NTSC] [SECAM] [NTSC4.43] [PAL-N] [PAL] [PAL-M] Attention zzSet this to [AUTO] under normal conditions. zzSwitch the settings to the respective TV signal formats. Note zzSetting [AUTO] will automatically select NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM, or PAL60. Settings ENGLISH - 57